1-20 Flashcards
While approaching the airport, you are 15 miles from the runway at 3,000’ AFL. As you begin to configure the aircraft for landing, when would you expect the hydraulic ACMPs 1 and 2 to turn on?
When the flaps are selected to any position greater than zero.
The crew elects to single engine taxi on Engine #2. With the flaps extended, the parking brake released, and no other action taken, which hydraulic pump(s) will be operating?
ACMP 3A and Engine driven pump #2
The backup hydraulic pumps for systems 1 and 2 are the _______?
ACMPs (AC Motor Pumps)
What is the primary purpose of the PTU?
The PTU assists gear extension or retraction should the right
engine or right EDP fail.
The H-PBIT will run automatically when all 3 hydraulic systems are pressurized and:
Either B or C:
Hydraulic reservoir temperature is at or above 10° C or
H-PBIT timer is at 0 HOURS regardless of temperature.
On the post flight external inspection, you notice fluid leaking from the nosewheel gear assembly. Which hydraulic system would you expect to be the source of this leak?
System 2
If Hydraulic Pump 3A fails during taxi out to the runway, will hydraulic pump 3B automatically turn on?
No
In system 3, ___ is the primary hydraulic pump.
3A
To check hydraulic reservoir temperature, pressure, and quantity, go to the _________.
Hydraulic Synoptic page on the MFD
In the event of a total loss of hydraulic systems 1 and 2 the only way to stop the aircraft is with reverse thrust?
False
The PBE (Protective Breathing Equipment) provides oxygen by:
Pulling the mask apart with two hands, which activates each of
the oxygen cylinders, providing 15 minutes of oxygen
When cleaning the oxygen mask, it is acceptable to use alcohol wipes on the lens and rubber parts of the mask.
False
Halon Fire Extinguishers can be used for:
All of the above: Class A, B, C fires
In the case of an emergency evacuation the PIC must make every effort to preserve aircraft documents and maintenance records.
True
In the case of partial slide deployment….
Stop immediately and notify maintenance