YCM NH500A Flashcards
What is the X-axis travel distance of the YCM NH500A DP?
The X-axis travel is 800 mm or 31.5 inches.
What type of axis drives and encoders are used in the YCM NH500A DP?
The machine uses AC digital servo motors with 4 million pulse encoders.
What material is the bed of the YCM NH500A DP made from?
The bed is constructed from Meehanite cast iron.
What type of guides does the YCM NH500A DP use in the X, Y, and Z axes?
It uses linear cylindrical roller-type guides in the X, Y, and Z axes.
What is the ballscrew pitch for the X, Y, and Z axes on the YCM NH500A DP?
The ballscrew pitch is 20 mm or 0.79 inches.
What is the maximum rapid traverse rate for the X, Y, and Z axes of the YCM NH500A DP?
The rapid traverse rate is 60 m/min or 2,362 inches per minute.
What is the B-axis rotational speed of the YCM NH500A DP?
The B-axis rotational speed is 22.2 revolutions per minute.
What is the B-axis table load capacity on the YCM NH500A DP?
The B-axis table load capacity is 500 kg or 1,102 lbs.
What is the spindle speed range for the YCM NH500A DP?
The spindle speed range is from 0 to 15,000 rpm.
What type of spindle nose interface is used on the YCM NH500A DP?
The machine has a dual contact BBT40 spindle nose interface.
How many tools can the automatic tool changer hold on the YCM NH500A DP?
The automatic tool changer has a capacity of 60 tools.
What is the tool change time (chip-to-chip) for the YCM NH500A DP?
The chip-to-chip tool change time is 5 seconds.
What is the required floor space for the YCM NH500A DP?
The required floor space is 3,056 x 6,217 x 2,942 mm or 120.3 x 244.76 x 115.8 inches.
What is the maximum workpiece diameter that the YCM NH500A DP can accommodate?
The maximum workpiece diameter is 880 mm or 34.7 inches.
What is the coolant tank capacity of the YCM NH500A DP?
The coolant tank capacity is 150.6 US gallons.
What is the electrical requirement for the YCM NH500A DP?
It requires 220 volts, 3-phase, and 60 hertz with a 180-amp breaker.
What is the spindle drive motor power of the YCM NH500A DP at maximum horsepower?
The maximum spindle drive motor power is 37 kW or 50 HP.
What is the minimal table increment for the B-axis on the YCM NH500A DP?
The minimal table increment is 0.001 degrees.
What is the weight of the YCM NH500A DP?
The machine weighs 13,490 kg or 29,740 lbs.
What is the recommended ambient temperature for optimal accuracy on the YCM NH500A DP?
The recommended temperature is 68°F ± 3°F, in a temperature-controlled environment.
What is the height of the workpiece that the YCM NH500A DP can accommodate?
The maximum workpiece height is 1000 mm or 39.37 inches.
What tool shank types are compatible with the YCM NH500A DP spindle?
The compatible tool shank types include CAT40 or BBT40 taper.
What is the tool clamping force of the YCM NH500A DP?
The tool clamping force is 918 kgf or 2,024 lbf.
What method does the YCM NH500A DP use for tool clamping?
It uses a helical disc spring for tool clamping.
What is the continuous spindle drive motor rating for the YCM NH500A DP?
The continuous rating is 15 kW or 20 HP.
What is the maximum tool diameter for the YCM NH500A DP’s automatic tool changer when adjacent pockets are empty?
The maximum tool diameter with adjacent pockets empty is 160 mm or 6.3 inches.
What is the maximum tool weight that the YCM NH500A DP’s tool changer can hold?
The maximum tool weight is 10 kg or 22 lbs.
What is the minimum air supply pressure requirement for the YCM NH500A DP?
The minimum air supply pressure is 5.4 bar or 78.2 psi.
What is the air dryer specification for the YCM NH500A DP?
The inlet air temperature should be 35°C or below.
What is the standard color scheme for the YCM NH500A DP?
The standard colors are YCM White, Blue, and Black.
What is the net weight of the YCM NH500A DP?
The net weight is 13,490 kg or 29,740 lbs.
What is the gross weight of the YCM NH500A DP when shipped?
The gross weight when shipped is 15,880 kg or 35,009 lbs.
What are the shipping dimensions for the main case of the YCM NH500A DP?
The main case is 6.3 m (L) x 2.31 m (W) x 2.56 m (H) or 20.67 ft (L) x 7.58 ft (W) x 8.4 ft (H).
What is the B-axis rotational angle range for the YCM NH500A DP?
The B-axis can rotate from 0 to 360 degrees.
What are the dimensions of the chip conveyor and tank for shipping the YCM NH500A DP?
The dimensions are 3.72 m x 2.19 m x 1.81 m or 12.2 ft x 7.19 ft x 5.94 ft.
What is the full horsepower spindle RPM for the YCM NH500A DP?
The full horsepower is obtained at 1,150 RPM.
What is the tool change time from tool-to-tool for the YCM NH500A DP?
The tool-to-tool change time is 2 seconds.
What is the bearing lubrication method for the spindle on the YCM NH500A DP?
The bearing lubrication method is air-oil.
What is the purpose of the chiller unit on the YCM NH500A DP?
The chiller unit controls the spindle temperature.
What is the maximum tool length that the YCM NH500A DP’s automatic tool changer can accommodate?
The maximum tool length is 400 mm or 15.75 inches.
How is the tool selection method described on the YCM NH500A DP?
The tool selection method is bi-directional, random access.
What are the shipping dimensions for the cover of the YCM NH500A DP?
The dimensions for the cover are 3.72 m x 2.19 m x 1.32 m or 12.2 ft x 7.19 ft x 4.33 ft.
