JC10, JC10E & JC10+ Flashcards
What are the axis travel distances (X, Y, Z) for all JC10 models?
X-axis: 1,020 mm (40.1”), Y-axis: 520 mm (20.47”), Z-axis: 540 mm (21.26”).
What material is used for the casting construction across all JC10 models?
Meehanite Cast Iron.
What type of guideways are used for the X, Y, and Z axes in the JC10 and JC10+ models?
NR Linear Ball Bearing Type Guides.
What is the ballscrew pitch for the JC10 and JC10+?
16 mm (0.63”).
What is the ballscrew pitch for the JC10E?
12 mm (0.47”).
What type of motors and encoders are used in all JC10 models?
AC Digital Servo Motors with 1-Million Pulse Encoders.
What is the rapid traverse rate for the X and Y axes in the JC10 and JC10+?
48 m/min (1,890 IPM).
What is the rapid traverse rate for the X and Y axes in the JC10E?
36 m/min (1,417 IPM).
What is the maximum spindle speed for the JC10 and JC10+?
12,000 rpm.
What is the maximum spindle speed for the JC10E?
10,000 rpm.
Which JC10 model has the highest spindle motor horsepower, and what is it?
The JC10+ with a maximum of 30 HP.
What is the continuous spindle rating for the JC10 and JC10+ models?
10 HP for JC10, and 15 HP for JC10+.
What is the spindle torque at 60% duty for the JC10?
70 Nm (51.6 ft. lbs.).
What is the tool clamping force for all JC10 models?
1,225 kgf (2,700 lbs.).
What spindle nose interface is used on the JC10 and JC10+?
Big Plus CAT 40.
What spindle nose interface is used on the JC10E?
Dual Contact CAT 40 (BBT40).
What is the table size for all JC10 models?
1,120 x 520 mm (44.0” x 20.4”).
What is the maximum table load capacity across all JC10 models?
500 kg (1,102 lbs.).
How many T-slots are there in the table configuration of all JC10 models, and what is their size?
5 T-slots, each 18 mm (0.70”) wide, spaced 100 mm (3.94”) apart.
What is the height of the tabletop from the floor across all JC10 models?
877 mm (34.52”).
What is the standard ATC capacity for the JC10 and JC10E?
30 tools for JC10, 24 tools for JC10E.
What is the standard ATC capacity for the JC10+?
40 tools.
What is the tool-to-tool change time for all JC10 models?
1.8 seconds.
What is the chip-to-chip time for the JC10E?
4.9 seconds.
What is the chip-to-chip time for the JC10 and JC10+?
6.2 seconds.
What cooling system is standard for all JC10 models?
Chiller Unit for Spindle Jacket.
How is the spindle lubricated across all JC10 models?
Grease lubrication.
What is the minimum air supply pressure required for all JC10 models?
5.5 bar (80 psi).
What is the coolant tank capacity of the JC10 and JC10+ models?
98 US Gallons.
What is the coolant tank capacity of the JC10E?
79.25 US Gallons.
What is the power rating (KVA) for the JC10E?
29 KVA.
What is the power rating (KVA) for the JC10 and JC10+ models?
37.3 KVA.
What is the required floor space (W x D x H) for the JC10 and JC10+?***
3,050 x 2,900 x 3,000 mm (120.07” x 114.17” x 118.11”).
What is the required floor space (W x D x H) for the JC10E?
3,135 x 2,570 x 2,850 mm (123” x 101” x 112.2”).
What is the weight of the JC10E?
5,350 kg (11,800 lbs).
What is the weight of the JC10 and JC10+?
5,350 kg (11,795 lbs).
Which JC10 model includes a single chip auger for chip management?
JC10E.
How many augers does the JC10+ use for chip management?
Three augers, with an additional scraper chip conveyor.
Which model is equipped with FANUC 200FA+ control, and what screen size does it feature?
JC10E, with a 10.4” LCD screen.
What processing capabilities does the FANUC 200FA+ control system offer in the JC10E?
2ms Block Processing Time and 200 Block Look Ahead.
Which model is best suited for demanding industries like medical and aerospace due to its control system?
JC10E, with the FANUC 200FA+ control.
At what RPM should operators reduce spindle speed to re-lubricate bearings when running continuously above 8,000 RPM?
Reduce to 2,000 - 4,000 RPM for 10 minutes every four hours.
What is the constant torque range across all JC10 models?
100 to 1,500 RPM.
What is the benefit of using NR Linear Ball Bearing Type Guides on the JC10 and JC10+?
Greater rigidity and stability for complex parabolic arc machining and fast rapid rates.
Which JC10 model has the highest continuous torque rating and what is it?
JC10+, with a continuous torque rating of 38.7 ft. lbs. (52.5 Nm).
What is the minimum and maximum spindle nose to table distance on all JC10 models?
140 mm to 680 mm (5.51” to 26.77”).
What is the distance from the spindle center to the Z-axis way cover across all JC10 models?
21.14”.
What tool holder types are compatible with the JC10 and JC10+ models?
Big Plus, CAT40.
What tool holder types are compatible with the JC10E model?
Dual Contact CAT40 (BBT40).
Which JC10 model offers the highest tool capacity in the ATC?
JC10+, with an optional 60-tool ATC.
