YCM C7 HS Flashcards
What is the X-axis travel distance of the YCM C7 HS?
The X-axis travel is 660 mm or 25.98 inches.
What is the Y-axis travel distance of the YCM C7 HS?
The Y-axis travel is 510 mm or 20.08 inches.
What is the Z-axis travel distance of the YCM C7 HS?
The Z-axis travel is 560 mm or 22.05 inches.
What type of axis drives and encoders are used in the YCM C7 HS?
It uses AC digital servo motors with 4-million pulse encoders.
What material is the bed of the YCM C7 HS made from?
The bed is constructed from Meehanite cast iron.
What type of guides are used on the X, Y, and Z axes for the YCM C7 HS?
Linear cylindrical roller-type guides are used.
What is the ballscrew pitch for the X, Y, and Z axes on the YCM C7 HS?
The ballscrew pitch is 16 mm or 0.63 inches.
What is the ballscrew diameter for the X, Y, and Z axes on the YCM C7 HS?
The ballscrew diameter is 45 mm or 1.77 inches for all axes.
What is the positioning accuracy with scales on the X, Y, and Z axes for the YCM C7 HS?
The positioning accuracy is 0.007 mm or 0.00027 inches for each axis.
What is the repeatability with scales on the X, Y, and Z axes for the YCM C7 HS?
The repeatability is 0.005 mm or 0.00019 inches for each axis.
What conditions are recommended for accuracy testing on the YCM C7 HS?
Testing should be conducted in a temperature-controlled environment with an ambient shop temperature of 68°F ± 3°F and on an approved foundation.
What is the rapid traverse rate for the X and Y axes on the YCM C7 HS?
The rapid traverse rate is 50 m/min or 1,969 IPM for the X and Y axes.
What is the rapid traverse rate for the Z-axis on the YCM C7 HS?
The rapid traverse rate is 48 m/min or 1,890 IPM for the Z-axis.
What is the cutting feed rate for the X, Y, and Z axes on the YCM C7 HS?
The cutting feed rate is 20 m/min or 787 IPM.
What type of spindle nose interface does the YCM C7 HS use?
The spindle nose interface is Dual Contact BBT40.
What tool shank types are compatible with the YCM C7 HS spindle?
The compatible tool shank types are CAT40 or BBT40 taper.
What is the tool clamping force of the YCM C7 HS?
The tool clamping force is 1,225 kgf or 2,700 lbf.
What tool clamping method is used on the YCM C7 HS?
It uses a helical disc spring for tool clamping.