Week 3

Question 1

is used to stand on or to place hardware on to prevent static electricity from building up.

Answer 1

Antistatic Mat

Question 2

protects computer equipment when grounded to a computer chassis.

Answer 2

Anti Static Wrist Strap

Question 3

is used to loosen or tighten slotted screws.

Answer 3

Flat Head Screw Driver

Question 4

is used to tighten or loosen cross-head screws

Answer 4

Phillips Head Screwdriver

Question 5

is used to tighten or loosen screws that have a star-like depression on top

Answer 5

Torx Screwdriver

Question 6

also called nut driver, used to tighten nuts in the same way that screwdriver tightens

Answer 6

Hex Screwdriver

Question 7

is used to retrieve parts from locations that are too small for the hand to fit.

Answer 7

Part Retriever

Question 8

used to cut wires

Answer 8

Wire Cutters

Question 9

is used to attached connectors to wires

Answer 9

Crimper

Question 10

used to terminate wire into termination blocks

Answer 10

Push Down tool

Question 11

is used to remove the insulation from wire

Answer 11

Wire Stripper

Question 12

is used to clean computer w/o scratching or leaving debris

Answer 12

Soft, Lint-Free Cloth

Question 13

is used to hold small parts and prevents them from mixing together

Answer 13

Part Organizer

Question 14

are used to bundle neatly inside and outside of a computer

Answer 14

Cable Ties

Question 15

is used to blow away dust and debris from computer parts

Answer 15

Compressed Air

Question 16

is used to trace cables

Answer 16

Tone Generator And Probe

Question 17

a hard drive that can be used to diagnose that does not boot

Answer 17

External Enclosure Houses

Question 18

is used to test integrity of circuits and the quality of electricity

Answer 18

Digital Multimeter

Question 19

is used to test the basic functionality of a computer ports

Answer 19

Loopback adapter