Week 19 (Review) Flashcards
What catches any spilled oil during servicing and safely route to engine drain mast?
Oil Scupper
What is the ideal time of getting a sample of oil?
5-30 mins after shutdown
Filters are rated in?
Microns
DURING A TYPICAL TURBINE OIL FILTER BOWL INSPECTION.
WHAT DOES THE “RED” Indicator mean?
The filter is clogged.
What is the purpose of the fuel/oil heat exchanger?
to cool the Oil by transferring the heat to the cold fuel (and warming the fuel).
The FUEL/OIL Heat exchanger 3 Modes of operation
Hot, Cold, and Differential Pressure Bypass mode
3 types of thrust reversers
Bucket door
Clamshell
Cascade
Which device prevents the Engine Throttle Levers from moving in the Thrust Reverser system?
Thrust Reverser Interlock mechanism
What are the main components of an exhaust duct?
Cone Assembly
Duct
Nozzle
4 different FCU designs
Hydro-Mechanical
Hydro-Pneumatic
Supervisory EEC
FADEC
the 2 primary FCU tasks
Fuel Computing and Fuel Metering
The heart of the FADEC system
Electronic Engine Control (EEC)/ Electronic Control Unit (ECU)
2 primary designs of fuel nozzles
SIMPLEX and DUPLEX
has a single fuel supply line to the nozzle … but depending on design can produce either 1 conical spray or 2 conical spray
Simplex
has 2 supply lines and 2 spray patterns at the fuel nozzle
Duplex