WCA Panel Indications! Flashcards
MASTER WARNING
Two flashing lights on either side of instrument panel
One or more warning lights on WCA panel illuminates
OR
Unassociated MASTER WARNING Light
FIRE
Two engine lights above WCA panel
Engine fire lights on each EFSL
One MGB light below COM 1 RRU
Engine or MGB fire/overheat condition
MASTER WARNING
ELEC PUMP
Emergency hydraulic system pressure above 1377 PSI
MASTER WARNING
PRI SERVO P
SERVO JAM
LIMIT
Primary hydraulic system pressure below 145 psi resulting in loss of pressure to the upper bodies of the main servo controls
MASTER WARNING
SEC SERVO P
SEC HYD LO PRES
SERVO JAM
Secondary hydraulic system pressure below 145 psi resulting in loss of pressure to the lower bodies of the main servos and the left body of the tail servo
MASTER WARNING SEC HYD LO PRES SEC HYD ISOLATE SEC SERVO P SERVO JAM
Sec hydraulic system pres below 145 psi resulting in loss of pressure to the lower bodies of the main servos and the left body of the tail servo. Sec hydraulic system reservoir below 1 gal resulting in loss of primary landing gear actuating system, wheel braking system, and normal electrical power to the hoist.
MASTER WARNING
FEED TANK 1 or 2
Case 1: if one fuel system gauge reading is zero, then the fuel quantity in the corresponding feed tank is below 37 lbs of JP5
Case 2: if the fuel in the corresponding tank system is greater than zero and fuel pressure is normal, the fuel ejector system has failed
Case 3: if the fuel in the corresponding tank system is greater than zero and fuel boost pump pressure is zero with BOTH boost pumps on, a dual boost pump failure has occurred.
MASTER WARNING
BATT TEMP
Battery has exceeded internal temperature limit of 135ºF (57ºC)
MASTER WARNING
ENG 1 CHIP or ENG 2 CHIP
ENG # CHIP on VEMD
Ferrous particles detected in engine oil system
MASTER WARNING
GB CHIP
TGB CHIP on VEMD
Ferrous particles detected in tail gearbox
MASTER WARNING
SEC HYD HI PRES
Secondary hydraulic system pressure above 3480 psi caused by governing failure of the self-governed hydraulic pump
MASTER WARNING
ENG 1/2 OIL P
Engine oil pressure below 25 psi
MASTER WARNING
SERVO JAM
Jammed servo control distribution valve
MASTER WARNING
SEC HYD LO PRES
Secondary hydraulic system pressure below 2450 psi
MASTER WARNING
OIL TEMP
Main gearbox temperature has exceeded 120ºC or engine oil temperature has exceeded 115ºC (check VEMD)