Vol.1 Flashcards
Who is responsible for ensuring that good supply discipline is practiced?
Supervisors at all levels
How long are bench stock levels established for?
30-day usage
Which form is used to issue an item of equipment for short, specified periods?
AF IMT 1297
All items that come through supply channels are assigned what type of code?
ERRC
Within maintenance the internal control of reparable items is accomplished through the DIFM notice and what form?
AFTO Form 350
Which DD forms are easily identified by their green margins and letters?
1577-2 and 1577-3
Engines overhauled by depot are covered against what defects in workmanship?
100 hours of operation or one year from the date of receipt
Which inspection is due on the accrual of a set number of flying or operating hours, or at the expiration of a calendar period specified in the applicable aircraft-specific -6 TO and is a thorough inspection of the entire aerospace vehicle?
Periodic
Which inspection concept uses specified calendar intervals to build a schedule and consists of the home station check, major, and minor inspections?
Isochronal
Which inspection examines areas, components, and systems to a degree beyond -6 TO inspection requirements?
Programmed Depot Maintenance
Minimum aircraft inspection requirements are outlined in what?
Inspection workcards
Which inspection is usually performed just prior to takeoff and may include operational checks of some systems?
EOR
When is the TH inspection normally performed?
After flights when a turn-around sortie or continuation flight is scheduled
Which inspection is required if an aircraft is idle for more than 30 or 90 days?
Calendar
Which inspection ensures the completeness of historical documents?
Acceptance
To transfer -21 equipment through transportation channels, what DD Form should be used?
1149
Which TO should be consulted for detailed information about weight and balance?
1-1B-50
What is used in determining design criteria such as engine requirements, wing area, landing gear requirements, and payload capacity?
Aircraft weight
Which medical concept forms the basis of ABDR assessment philosophy?
“TRIAGE”
When does corrosion or deterioration of a metal part begin?
the instant it is fabricated or manufactured
Corrosion or deterioration of a metal part continues until the part is what?
exhausted or salvaged
What type of corrosion can be recognized by a lifting up or swelling of the metal grains?
Exfoliation
What corrosion type appears as corroded cracks in the metal?
stress
What TO are alkaline and solvent cleaners authorized for use on our aircraft specified in?
TO 1-1-691
