Triggers & Flows (CA) Flashcards
After fueling is complete and approximately 10 minutes prior to gate departure
Start the APU
Fasten Belts - On
APU - On Busses
Fuel Panel - Set
AML and Flight Forms - Check
After all external doors are closed, and the cabin ready and guideperson ready for pushback reports are received
Flightdeck door - Closed and Secured
Doors/Windows - Closed/Locked
After engine(s) stabilized
Anti-Ice Switches - As required
Generators - On
“I have a salute”
“Flaps ____”
APU - As Required
Fight Control Check
After Load Closeout reviewed, both engines running and flaps set for takeoff
Takeoff Data and Bugs - Check
HUD - Set
GEN1 and GEN2 - On
A/C and Bleeds - Auto & Set
Flaps - Set and Green Light
Stab Trim - Set
When approaching number one position for takeoff
MCP/ND - Check
Exterior Lights - Set
Minimum Takeoff Fuel- Verify
After flap and slat retraction (After Takeoff)
Pilot Monitoring
Gear - Off (3RA-3VM - Up)
Flaps - Up/No lights
Auto brake - Off
A/C, Bleeds and Pressurization - Check
Anti-Ice - Check
APU - As Required
Descending through 18,000 feet MSL (Pilot Flying)
Exterior Lights - Set
Anti-Ice - As required
Terrain Display - Select
Auto Brake - As required
FMS - Set
Radios and Displays - Set
Descending through 18,000 feet MSL (Pilot Monitoring)
Exterior Lights - Set
Fasten Belts - On
Anti-Ice - As required
Pressurization - Check
Recall - Checked
Terrain Display - Select
Radios and Displays - Set
After the aircraft has cleared the landing runway
“Flaps ____”
Speed Brake - Down Detent
Exterior Lights - As Required
After the aircraft is parked with the parking brake set
Parking Brake - Set
Passenger Signs - Off
Electrical - On
“Shutdown engine No. 1 (and 2)”
IRS Mode Selectors - Off
Fuel Pumps - As required
HUD - Stow
Flightdeck lights - As required
AML Complete
APU/External Power - As required
