Tools 7,11,17,29,10

Question 0

The OST shall always be ?

Answer 0

Attached to the nozzle

TBTools 7.3.10

Question 1

Identifying letters and numbers placed on nozzles and components shall be placed on the?

Answer 1

Coupling along the hub, adjacent to the coupling lug.

TBTools7.3.9

Question 2

While testing the controlling nozzle how many lengths of hose shall be used?

Answer 2

2 lengths TBTools7.3.15

Question 3

An effective firefighting stream using a fog nozzle tip is one delivering?

Answer 3

180GPM TBTools TBToolsDS12.5.1

Question 4

It’s is the responsibility of the what due company to deliver the HRN to the command post?

Answer 4

4th due Engine TBToolsDS17.2.3

Question 5

Supplied by a 2.5 inch hose line the HRN will produce flows of how manyGPM at what pressure?

Answer 5

200-225GPM@50psi nozzle pressure with water flowing

TBToolsDS17.4.3

Question 6

Locking plunger retaining latch assembly on the multiversal is what color?

Answer 6

Bright orange TBTools17.2.1g

Question 7

When placing the multiversal into operation connect hoses after?

Answer 7

Tying required knots TBTOOLS 17.3.3.5

Question 8

When multiversal is set up in the portable mode the hose ____ feet closest to the appliance shall not be moved unless ?

Answer 8

15 feet / The water supply is shut down TBTOOLS 173.4.4

Question 9

In the portable position the multiversal horizontal rotation is limited to ___ degrees in each direction from ?

Answer 9

90 / the straight ahead position TBTOOLS 17.5.1

Question 10

Truck mounted multiversal is limited to how many degrees below horizontal ?

Answer 10

15 degrees below 90 degrees above TBTOOLS 17.5.2

Question 11

The maximum pressure for the multiversal operation is?

Answer 11

200psi TBTOOLS 17.7.5

Question 12

Upon searching you find a sure search door maker what does this mean?

Answer 12

Primary search in progress or completed, you should continue searching to a different area TBTOOLS 19.3.2

Question 13

While using a sure search door marker you cannot finish your primary of the area you should?

Answer 13

Removed the marker and notify the officer in command TBTOOLS19.3.4

Question 14

When storing the power unit on the apparatus, the fuel valve lever must be?

Answer 14

In the OFF position. TB10 3.3

Question 15

When placing hurst tool OOS on weekdays between business hours notify who?

Answer 15

Technical services TB10 4.1

Question 16

When placing hurst tool OOS weekends or after business hours notify who?

Answer 16

FDOC TB10 4.2

Question 17

Hurst tool manual hand pump must not be used with what

Answer 17

Telescoping ram TB10 data sheet18-19 2.5

Question 18

Hurst tool hoses have a minimum burst pressure of?

Answer 18

20,000psi built in 4-1 safety TB10DS20 2.3

Question 19

If a portable generator is used to power an exhaust fan, the ideal length of the electrical cord should be?

Answer 19

50 feet or less. TBTools4 3.5

Question 20

How long and when should you test portable generators for proper working order?

Answer 20

15 minutes weekly. During this time, operate all lights for 5 minutes to test for proper working order of lights and generator under load TBTools4 3.8.2

Question 21

What type of SCBA cylinder may be used on air bags?

Answer 21

Only steel SCBA cylinders maybe used. TBTools20 2.5.1

Question 22

What is the Maximum internal air pressure for the air bag when lifting?

Answer 22

118psi TBTools20 4.2

Question 23

When stacking air bags how many can u stack and what is the tonnage capacity ?

Answer 23

Never stack more then 2. Tonnage of smaller bag is the max. TBTools 20 6.9

Question 24

What is the lifting capacity reduced by_____

To obtain max lifting height?

Answer 24

50% TBTools20 6.9.6 ex: A 30 ton bag with max lifting height of 10 inches will lift 30 tons one inch, but will lift 15 tons 10 inches

Question 25

Circle of danger of a radius of at least _____ feet before commencement of cutting with chainsaw.

Answer 25

10 feet. The saw person, control person will be only persons in the area during cutting. TBTools 24 4.4

Question 26

When using amplifiers on sound powered telephone system, after completed message is transmitted operator must?

Answer 26

Release the PTA button or reply will not be heard TBTools31 2.6.1

Question 27

How many members shall be dedicated to maintain the SPT communications link?

Answer 27

Two. Member shall be paired with another member who monitors HT communications. TBTools31 3.3

Question 28

T/F member should cover the mouthpiece of the headset of the SPT?

Answer 28

True. This will reduce the background noise that maybe transmitted through the wire. TBTools31 3.6

Question 29

When do we change battery on amplifier for the SPT ?

Answer 29

Semi annually TBTools31 5.1

Question 30

After checking battery on SPT amplifier the amplifier still doesn’t work contact?

Answer 30

Research and development TBTools31 5.2