Apparatus C-2, L-7

Question 1

What do we check every tour?

Answer 1

For        fill Fuel tank
Sex       Seat Belts
We        Warning devices
Like       Lights non response
Pussy    Purge air tanks

C-2 3.1

Question 2

Daily maintenance involves:

Answer 2

During-Door
Winter-Winshield
All-Air loss in brakes
Units-Upholstery
Shouldn't-Suspension
Take-Tires
Outside-Oil
BI-Battery
Readily-Radiator

c-2 3.2

Question 3

What voltage readings are important to know in regards to the battery?

Answer 3

Engine 700-800 rpm 2 min- 13.5-14.2
14.8 or higher overcharging
Engine off 12 or higher good

C-2 3.2.4

Question 4

The max air loss in the brake system is:

Answer 4

1 lb 10 min
10 lbs per app

3.2.5

Question 5

How do you check engine oil level and what are the correct pressures?

Answer 5

-check eng oil LEVEL when
 SHUT for AT LEAST 15 min
-MORE than 5 psi when at op
 temp & IDLE
-30-70 psi when op 
 1500-2100 rpm

C-2 3.2.6

Question 6

When are tires replaced in regards to tread wear?

Answer 6

when it reaches 3/16

C-2 3.2.8

Akron
1/16 spikes on legs
sharpened or replaced

Question 7

what weekly maintenance needs to be done:

Answer 7

Always-Air Cleaner(indicator-Green)
Have-Hydraulic fluid
Proby-Power steering pressure
Test-Transmission Fluid Eng on/warm,
Each-Electric fuel pump primer(5 sec)
Week-Wheels lugs, psi

C-2 3.3

Question 8

what speed shouldnt you exceed with snow chains on?

Answer 8

30 mph with chains
C-2 Add 1 2

15 mph turning apparatus
15 mph for 4 inch humps
20 mph for 3 inch humps

Question 9

For a rearmount how much stabilizer clearance is needed?

Answer 9

5 ft 2 inches

L-7 3.1

Question 10

When aerial is short jacked the rotation limiting device will not allow rotation of the aerial within how many degrees to center

Answer 10

15 deg

L-7

Question 11

In regards to calibrating the flow meter. Flow is determined by what?

Answer 11

size of pipe
velocity in pipe
size of nozzle

P-2 3.1

Question 12

When adjusting the setscrew on the flowmeter how should turns be made?

Answer 12

make slow 1/8” turns and pause to check the display reading.

P-2 Safety & Help 6

Question 13

What are the pressures for 1 3/4 hose & nozzle

and 2 1/2 hose & nozzle?

Answer 13

PSI
1 3/4"
1 5/16 nozzle 50
20 per length
2 1/2
1  1/8 nozzle 40
5 per length
5 per flr above grade

P-3 10.1.4