Tool Safety Quiz Flashcards
Another name for a machinist’s hammer is _____.
Heavy-duty tool used for driving posts or other large stakes is a _____.
Proper angles for the edge of a cold chisel is _____.
60°
Type of screw that fits in a box figure is a(n)
Which of the following screws comes to a relatively sharp point at the base of its drive socket?
How many sides does a hexagonal shape have?
In what way is a spud wrench different from a pipe wrench?
To quickly run a nut onto a bolt that resists spinning it on wit the fingers, you can drive the socket with a(n)
Another common name for lineman pliers is ____.
Because of its stiffness, a folding rule is better than a cloth or steel tape for measuring _____.
One situation that can make a measurement with a laser inaccurate is measuring to a _____.
When an object is plumb it is _____.
In addition to level and plumb, some spirit levels can check a _____.
To check level conditions over a significant distance, such as a building foundation or longer distance, the best level to use is a _____.
Which of the following saws would likely have the fewest teeth per inch, resulting in the largest teeth?
The saw shaped like a D with the line being a thin saw is called a _____.
coping saw
The best-designed saw for cutting miter joints is a ____.
When using a utility knife, place a piece of scrap material under the object you are cutting in order to _____.
The safest kind of utility knife is one with a _____.
Shovels typically have handles made of wood or _____.
Before using a pick, check to be sure that the head is _____.
A chain fall locks its elevated load in place using _____.
Cable come-alongs are used to move loads _____.
The clamp with a C-shaped closed mouth and two handles at the back is a _____.
