Power Tools Quiz

Question 1

When using power tools, never engage the _____.

Question 2

Before replacing parts such as bits, blades, or discs on any tool, you must _____.

Question 3

Most hammer drills will not hammer until pressure is _____.

Question 4

A pneumatic drill is commonly used _____.

Question 5

Never use a circular saw that does not have an upper blade guard because the _____.

Question 6

When using a circular saw, be sure to cut on the waste side of the cut mark to allow for the blade’s _____.

Question 7

Saws with fine blades that are excellent for delicate and intricate cutting are called _____.

Question 8

Before you plug any saw into a power source, make sure the _____.

Question 9

A saw that has a thin, one-piece blade that runs around guides at either end of the saw is a _____.

Question 10

A power miter saw combines a miter box with a _____.

Question 11

An angle grinder is used to grind _____.

Question 12

The adjustable tool rest on a bench grinder should be positioned _____.

Question 13

A good way to check the condition of the grinding wheel on a bench grinder is to _____.

Question 14

A grinder can catch on rough material edges and sift around, especially when using rotary bits called _____.

Question 15

A low-velocity fastening system that is used to drive steel pins or threaded studs into masonry and steel is a(n) _____.

Question 16

Special training and certification is required before using any kind of _____.

Question 17

Before using a pneumatically powered nailer for the first time, it is important to _____.

Question 18

If a pneumatic nailer is not firing properly, before attempting repairs be sure to _____.

Question 19

A power tool that is well suited for breaking up concrete during demolition work is a(n) ____.

Question 20

A Porta-Power is an example of a(n) _____.