TIC

Question 1

8 parts of tool

Answer 1

• 4” LCD display
• Apparatus mounted charger
• On/Off Button
• Mode Button
• Zoom Button
• Save trigger
• Rechargeable battery, 4 hours operating time
• USB port for picture downloading

Question 2

How to put on standby

Answer 2

Push and hold between 3 to 10 seconds to place camera in Standby

Question 3

How to turn off

Answer 3

Push and hold for more than 10 seconds to camera Off

Question 4

What are five modes

Answer 4

NFPA (default setting), Black & White, Fire, Search & Rescue, and Heat
Detection.

Question 5

(High Sensitivity) temps

Answer 5

-4 to 302

Question 6

Search & Rescue and Heat detection modes are locked in__ sensitivity

Answer 6

high

Question 7

(Low Sensitivity temps

Answer 7

32-1202 F

Question 8

Seven safety factors

Answer 8

• Prior to entering environment, ensure that the camera is functioning properly by
  turning it on.
• Ensure that batteries are fully charged prior to use.
• Does not measure gas temperatures but rather the temperature of surfaces.
• Do not rely on the camera as sole means of navigation.
• Do not walk while looking through the TIC; it increases the danger of falling.
• The TIC is not intrinsically safe.
• Avoid overexposure to heat

Question 9

4 * Daily Check and After Use:

Answer 9

o Turn on camera and check battery condition.
o Inspect for condition, cleanliness, and for missing parts.
o Inspect battery and contacts for damage or leakage.
o Check apparatus mounted charger to ensure proper placement of FLIR and extra
battery

Question 10

3 maintenance

Answer 10

• Clean housing with a soft cloth damp with a mild detergent solution. (No Solvents)
• Clean infrared lens with cotton wool damp with lens cleaner.
• Store camera and additional battery in apparatus mounted charger

Question 11

charging times

Answer 11

o Charging time takes 4 hours when fully depleted, 2 hours to 85%
o Charging is complete when blue light glows continuously.

Question 12

Indicator-triangular symbol at the top center of screen which warns
that shut down is imminent due to internal overheating

Answer 12

overheating

Question 13

indicator-a small square in the center of the screen which reads surface
temperature.

Answer 13

spotmeter

Question 14

Indicator is a vertical bar on the right-hand side of the screen giving the
temperature of spotmeter

Answer 14

temperature scale

Question 15

Indicator is an icon in the lower center of the screen which shows
battery life

Answer 15

battery conditioner indicator

Question 16

Spotmeter temperature digital readout is in

Answer 16

lower right hand corner

Question 17

Green icon color indicates automatic switch between

Answer 17

high and low sensitivity ranges

Question 18

Blue icon color indicates sensitivity range

Answer 18

is locked

Question 19

4 TIC Limitations

Answer 19

• Cannot provide images through glass, water, or shiny objects; it displays reflected
  image.
• Do not point the camera at the sun
• Will not provide underwater images. If fogging occurs wipe off the screen and the
  sensor.
• Electromagnetic energy such as radio transmissions may cause interference.