"Tell Me Questions" Flashcards

1
Q

Tell me how you would check that the headlights and taillights are working

A
  • operate switch (turn on ignition if necessary)

- explain that you would walk around the vehicle to check they’re working

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
2
Q

Tell me how you would check that the brakes are working before starting a journey

A
  • explain that immediately after starting engine and setting off, the brakes should be tested in a safe area by applying them firmly
  • vehicle should not pull to one side and brakes should not feel spongy or slack
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
3
Q

Tell me how you would know if there was a problem with the anti-lock braking system

A
  • warning light should illuminate if there is a problem
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
4
Q

Tell me how you would make sure that your head restraint is correctly adjusted so it provides best protection in the event of a crash

A
  • head restraint should be adjusted so that the rigid part of the head restraint is at least as high as the top of ears/eyes- and as close to back of head as is comfortable
  • (some restraints might not be adjustable)
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
5
Q

Tell me how you would check tyres to ensure they have sufficient tread depth and their general condition is safe to use on roads

A
  • there should be not cuts/ bulges anywhere in tread or in sidewall
  • minimum of 1.6 mm of tread depth across central 3/4 of breadth of tyre and around entire outer circumference
  • tyre tread depth gauge can give an accurate measure of tread depth
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
6
Q

Tell me where you would find the information for recommended tyre pressures for this car and how tyre pressure should be checked

A
  • explain that correct tyre pressure can be found in the manufacturers guide or vehicle handbook
  • (often printed on label on inside of fuel filler lid or inside one of front door frames)
  • explain that you would use a reliable pressure gauge- checking and adjusting pressure when tyres are cold
  • would also need to check and adjust spare tyres pressure and remember to refit all of the valve caps
How well did you know this?
1
Not at all
2
3
4
5
Perfectly