SY206 Flashcards
To select a specific waypoint at a waypoint page, you can enter the waypoint directly, scan through indentifiers alphabetically, or enter the waypoint __________
name
To put the cursor over the first character in the airport identifier at the top of the screen, you should press the ____________ button
CRSR
The waypoint scan list consists of two sublists, the _______ list and the __________list
nearest; complete
The nearest waypoint display replaces the ___________ of a complete waypoint display with the bearing and distance to the waypoint
latitude and longitude
To find a VOR by name, turn the right outer knob to the __________ position
VOR
There are eight airport pages (APT 1-8) for every airport in the ___________ datebase
published
The only type of remarks that can be created, stored, and displayed into the APT 5 page are __________ remarks up to three lines of eleven characters each
airport-related
On a VOR page, a “D” after the VOR identifier indicates that the ____________
VOR has associated DME
The NAV 2 page displays the aircraft’s present position as latitude and longitude, and as a distance and bearing from a NDB.
False
On the NAV 5 page, you can move the cursor to the lower right field and set the range scale, which indicates the distance from the aircraft’s position to the ______ in nautical miles.
top of the screen
Super NAV 5 display adds an AUTO scale position that will automatically choose the smallest scale that will display the active waypoint and the ______.
waypoint after the active waypoint
By pressing the right CRSR button on the Super NAV 5 page, you can bring up a menu that allows you to add _______ symbols.
VOR, NDB, and APT
The Direct To feature of the GPS allows you to navigate directly from your present position to your destination via published routings.
False
If the active waypoint is a Missed Approach Point and the aircraft is on the “from” side of the waypoint, the display will show ______.
the first waypoint of the missed approach procedure
To cancel Direct To operation at any time, press the Direct To button, followed by the CLR button and then the ______ button.
ENT
About 36 seconds before you reach a Direct To waypoint, the waypoint identifier on a Super NAV 5 page will ______.
flash
Three ways to select a waypoint on the GPS is to use direct entry, scanning, or by ______.
name
The five waypoint types used by the GPS system are ______.
APT, VOR, NDB, INT, and SUP
To find an airport closest to your position in an emergency situation, you would press the ______ button on the GPS panel.
NRST
About ______ before you reach a Direct To Waypoint, the arrow in front of the waypoint identifier on the page for the active waypoint will start to flash.
36 seconds
To navigate directly from your present position to your destination rather than via published routes you would first select the ______.
Direct To Button