Standard Callouts Flashcards
Prior to crossing the hold short line
PF/PM: Runway _____ verified
Thrust levers at takeoff setting
PF: Check Thrust
PM: Thrust set
@ 100 knots indicated
PM: 100 knots
5 knots prior to V1
Auto: “V1”
VR
PM: Rotate
Positive Rate of Climb
PF/PM: Positive rate
PF: Gear Up
Transition Altitude (climbing)
Standard (STD)
Transition level (descending)
__ In/hPa
1000 feet above or below assigned altitude
PM: Designate approaching altitude appropriately (6000 for 7000; 6 for 7)
2,500ft RA
Auto (If not announced by A/C):
“2500”
PF and PM: “____ In/hPa”
1,000ft RA
Auto: “1000”
PF: Set missed approach altitude. Cleared to land.
or
Set missed approach altitude. No landing clearance
500 feet RA (Non-Autoland)
Auto: “500”
PF:
Stable
or
Unstable, going around
500 feet RA (autoland)
Auto: 500
PF: LAND__. stable
or
Unstable, going around
80 feet prior to minimums
Auto: “Approaching minimums”
At minimums
Auto: “Minimums”
PF: Landing
or
Going around
Landing Roll 80 knots
PM: 80 knots
Missed approach/Go-around
PF:
Going around flaps 20, check thrust
Positive rate, Gear up
Set missed approach altitude
@ 200ft
-Autopilot Engage
@ 400 ft
-LNAV/HDG
@800ft Set clean Maneuvering speed, flaps 5,
Flaps 1,
Flaps up
@ Clean maneuvering speed
- FLCH or VNAV
- After Takeoff Checklist
V1 Cut
After rotation:
PF: Positive rate, Gear up
PF: HDG/TRK or LNAV (No later than 400 ft)
@ 200 ft
-PF: Autopilot Engage
-PM: Advise ATC
@ 400 ft
-VNAV engages
-set lateral mode if not set
@ 800ft
-Accelerate
-Retract flaps on schedule
@ Clean maneuvering speed
PF: verify max continuous thrust (CON)
- Call for checklist
Single Engine Go-Around
PF: Going around flaps 5, check thrust
PF: Positive rate, Gear up, Set missed approach altitude
@200ft
- Autopilot On
- Announce lateral mode
@800ft Set clean Maneuvering speed (retract flaps on schedule)
@ clean maneuvering speed:
- Flight Level Change (FLCH) or VNAV
- CON reference thrust limit verify
-After Takeoff Checklist.