Standard Callouts Flashcards
Prior to crossing the hold short line
PF/PM: Runway _____ verified
Initial Thrust
PF: Autothrottles”
Thrust levers at takeoff setting
PF: Check Thrust
PM: Thrust set
@ 100 knots indicated
PM: 100 knots
5 knots prior to V1
PM: “V1”
VR
PM: Rotate
Positive Rate of Climb
PF/PM: Positive rate
PF: Gear Up
Transition Altitude (climbing)
__ In/hPa (767-4: The term “standard” may be used when selecting STD)
Transition level (descending)
__ In/hPa
1000 feet above or below assigned altitude
PM: designate approaching altitude appropriately (6000 for 7000; 6 for 7)
2,500ft RA
Auto/PM (if not announced by A/C):
2500
PF and PM: “____ In/hPa”
1,000ft RA
PF:
Set missed approach altitude. Cleared to land.
or
Set missed approach altitude. No landing clearance
500 feet RA (Non-Autoland)
PM: 500
PF:
Stable
or
Unstable, going around
500 feet RA (autoland)
PM: 500
PF: LAND__. stable
or
Unstable, going around
100 feet prior to minimums
PM: Approaching minimums
At minimums
PM: Minimums
PF: Landing
or
Going around
Landing Roll 80 knots
PM: 80 knots
Missed approach
PF:
Going around flaps 20, check thrust
Positive rate, Gear up
Set missed approach altitude
@400ft LNAV/HDG SEL
@800ft Set clean Maneuvering speed, flaps 5,
Flaps 1,
Flaps up
@ Clean maneuvering speed, FLCH (verify MCP speed), Autopilot, After Takeoff Checklist
V1 Cut
After rotation:
PF: Positive rate, Gear up
PF: HDG SEL/LNAV
@800ft
PF: Vertical speed +100, Set clean maneuvering speed, autothrottle arm switch off
Accelerate and Retract flaps on schedule
@ clean maneuvering speed
PF: Flight Level Change (FLCH), set clean maneuvering speed, set max continuous thrust.
Single Engine Go-Around
PF: Going around flaps 5, check thrust
PF: Positive rate, Gear up, Set missed approach altitude
@400ft HDG SEL
@800ft Set clean Maneuvering speed (retract flaps on schedule)
@clean maneuvering speed Flight Level Change (FLCH), set clean maneuvering speed, set max continuous thrust, After Takeoff Checklist.
