Small Animal Rotation

Question 1

Process for using pressure wash system in small animal area?

Answer 1

1. Remove all food and water bowls, place in sink with Roccal-D 1:200 for 10 minutes.
2. Open all floor drains in each run.
3. Turn on pressure washer to Rinse, and rinse all runs, clearing them of urine, feces, and food.
4. Press CHEM 2 button, readjust pressure button to LOW pressure, and spray each run including the walls, platform, and front and back of the kennel door. When you get to the 6th run, return to the wall panel and press the RINSE button.
5. Start back at the first run and thoroughly rinse on HIGH pressure the walls, floor, and platform, making sure all the Roccal-D is washed away completely before moving on to the next run.
6. Dry the floor, wall, and platform with a clean terry towel. Use a new towel on each run.
7. Weigh out the food for each patient, using the formula wt (lbs) x 1/3 oz of food (28.3g) is amount.
8. Clean the outside runs if they are dirty. Open the drain and unplug the SMT pressure washer from its connection. Take the hose reel to the outside panel an re-plug in the system. Using the same procedure used inside.clean each run.