Section C: Front & Back Of Trailer Flashcards
1
Q
Clearance lights (top of trailer)
A
- secured to the trailer
- not cracked or broken
- amber in color
- work on demand
2
Q
Front of trailer (Bulkhead)
A
- not bulging
- no holes or damage
- strong enough to hold freight
3
Q
Side of trailer
A
- not bulged out
- no holes
- DOT tape in place covering at least 50% of length of trailer
- tape not faded or peeling off
4
Q
Landing gear
A
- secure with all hardware in place and tight
- not cracked or broken
- all the way up
- crank handle in place and secure in bracket
- pads/feet free of debris
5
Q
Trailer frame
A
- not bent or broken
- no illegal holes or welds
6
Q
Side marker/4-ways/turn signal/reflectors
A
- securely attached
- not cracked or broken
- amber in color
- work on demand
7
Q
Tandem slide (if equipped)
A
- secured to the frame with all hardware in place and tight
- keeper pins in locked position in slide frame
- release handle is all the way in and in locked position
8
Q
Torque arm
A
- not bent or broken
- all hardware in place and tight
- bushings are good so it does not move
9
Q
Air bag, mounts, and shock absorber
A
- mounts secure with all hardware in place and tight
- no abrasions, bubbles, cuts
- not leaking
- shock absorber in place
- secured at top and bottom with all hardware present
10
Q
Brake air line
A
- connections tight at both ends
- not cut, frayed, or rubbing anything
- not leaking
11
Q
Brake chamber
A
- secured with all hardware in place and tight
- no holes or damage
- bands in place
- not leaking
12
Q
Slack adjuster push rod assembly
A
- secure with all hardware in place and tight
- not bent or broken
- no more than 1 inch of play when brakes released
13
Q
Brake shoes
A
- not broken or missing
- not covered in oil or grease
- at least 1/4 inch thick
14
Q
Brake drum
A
- not broken
- no welds
- not covered in oil or grease
15
Q
Tires (trailer)
A
- no abrasions, bubbles, or cuts
- no tread separation
- evenly worn
- at least 2/32 inch tread depth