Sec - 8 (Lining Application) Flashcards
1
Q
As a general rule, the surface temperature must be at least,,,,,, the dew point temperature in the tank and the relative humidity should be,,,,,,, at the steel surface.
A
5 °F (3 °C) above
below 80 %
2
Q
,,,,,,,,,,,,provides guidance on the use of dehumidification and heating equipment for environmental controls during tank lining work
A
NACE 6A192/SSPC-TR 3
3
Q
Excess,,,,,,, thickness is a common cause of failure of thick-film lining system
A
primer
4
Q
,,,,,,,,,,,,,,,, are major causes of premature lining failure
A
Improper application and inadequate curing tim