Sealant Tray Flashcards
Composite procedure
Hand mirror and explorer
330 bur
Rinse
Explorer
Etchant 2x2
Explorer
Retrieve with 2x2
While doc Rinse→Suction
Microbrush with bond
Air
Cure
Resin
Microbrush
Cure
Explorer
Polishing burs that belong on the tray
White stone
Flame
Football
Composite/resin set up
Mirror
Explorer
Air water tip
Salvia ejector
Mouth prop
Plugger
Ball Burnisher
Microbrush
Etchant
Composite resin
Cure
Gauze
Quip
Topical
330 burr
Finishing burr
Flame
Football
White stone
Syringe
For interproxmal
Wedge
Matrix
Rubber dam tray
1.Dental dam frame
2.Dental dam
3.Dental dam punch
Dam Clamp with floss
Size 14 is used for primary molar.
Size 14 A is use for permanent adult molar.
The procedure of dam
- Using the mouth mirror and explore, examine the site where the dam is to be
placed. It should be free of plaque. - Floss all contacts involved in the placement of the dental dam. Any tight contacts
may tear the dam. - Correctly punch the marked dam according to the teeth to be isolated. Make sure
to use the correct size of the punch hole for the specific tooth.
4Select the correct size of clamp.
5. Secure the clamp by tying a ligature of dental floss on the bow of the clamp.
6. Place the tips of the dental dam forceps into the holes of the clamp. Grasp the
handles of the rubber dam forceps, and squeeze to open the clamp. Turn upward,
and allow the locking bar to slide down to keep the forceps open for placement.
- Position the lingual jaws of the clamp first, then the buccal jaws. During
placement, keep an index finger on the clamp to prevent the clamp from coming
off before it has been stabilized on the tooth. Check the clamp for fit, rock down if
needed. - Transferring the dental dam site to this site, stretch the punched hole for the
anchor tooth over the clamp. - Position the frame over the dam, and slightly pull the dam, allowing it to hook
onto the projections of the frame. - Use a piece of dental floss to floss between the contacts, pushing dam below to
keep the teeth isolated.
Anesthesia pain control tray
2x2 gauze
Topical anesthetic ointment
Sterile cotton tip
Syringe
Anesthesia and pain control procedure
Determine injection site and gently dry area with 2x2 gauze
Place topical directly on the injection site
Gently remove excess topical from area
Dr starts local anesthetic
Place 2x2on patient chest
Sealant procedure
Moisture control
Hand Rinse
Air (suction)
Hand Etch with 2x2
Hand Rinse
Air (suction)
Hand Sealant
Cure
Hand Explorer
Sealant tray
Barriers
Bib
Shades
Mirrors
explorer
Air/water tip
Etch
Suction
Sealant
Floss
Cure
Exam tray
Shades
Bib
Mirror
Explorer
Air water tip
2x2
ssc procedure
Occlusal burr (rinse)
169 burr (rinse)
Explorer
Rinse
SSC
Bitstick
Carver
Mix cement
SSC with cement
Bite stick
Floss with knot
PSSC procedure
Topical
ISO lite
Syringe
Occlusal burr
169 burr
Round bur
Spoon
Explorer
Rinse suction
Dry with gauze
Formo cotton pellet
Change gloves
Explorer
Zoe in cone shape
Plugger
Wet cotton tip
Explorer
SSC
Bite stick
Carver
Mix cement
SSC with cement
Bite stick
Floss with knot
Extraction procedure
Topical
Syringe
4x4wrappedoverElevator
Air
Forceps
Ghosts
TOOTH A extraction force is
150
B tooth uses
150 forceps