Rules And Regulations Flashcards

1
Q

As a worker you should not only know your responsibilities for workplace safety but also those of your employer. An employer must ensure that a worker is trained in the safe operation of equipment. Which will include what 7 things

A
Selection of appropriate equipment 
The limitations of the equipment 
An operators pre use inspection 
The use of the equipment 
Basic mechanical and maintenance 
Loading and unloading of the equipment 
The hazards specific to the job site
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
2
Q

This applies to all lifting devices with a rated capacity over 2000 kgs . The lifting device must legibly show on a plate or weatherproof label what five things

A
The manufactures rated load capacity 
The manufactures name
The model
The serial number 
Year of manufacture or shipment date
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
3
Q

Does a mobile crane or boom truck need to be equipped with a load chart showing the rated capacity and all permitted boom angles and radii, and if it does who’s responsibility is it

A

The employer

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
4
Q

When should the operator familiarize himself with all recent log log book entries

A

Before operating

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
5
Q

Who is responsible for ensuring that the logbook is readily available for inspection by an officer at anytime and that the most current log book is with the crane or available to the operator.

A

The employer

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
6
Q

Give examples of information needed in the logbook

A

The date/time
Record of hours of service
All defects and when they were detected
Repairs, modifications, checks and tests
Any incident that may affect the safe operation or the crane
Each entry must be signed by the person doing the work

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
7
Q

What does the record of certification under section 73 refer too

A

Any modification or repair to a crane must be inspected and certified by an engineer. To confirm the standard is up to the original capacity.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
8
Q

As the operator if you have any doubts as to the safety of the lift or workers in the area you must do what

A

Not move any equipment or load until you are satisfied the conditions are safe

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
9
Q

Who must ensure the operator/rigger/supervisor are provided with all the information needed to enable them to accurately determine the weight of the load to be lifted

A

The employer

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
10
Q

What are the rules and stipulations for tag lines

A

If workers are in danger because of load movements then a tag line must be used
Tag line must be of sufficient length to control the load
Must not put the worker in danger
Tag line must not be of conductive material when there is a danger of electrical contact
Tag line must not be used when their use could increase danger to workers

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
11
Q

Hand signals must be given in accordance with section 191. What is the first rule of a signaller

A

Designated signaller must wear a vest/armlet or clothing that clearly identifies the signaller

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
12
Q

Who besides a signaller must be visibly distinguishable from other workers

A

A worker using a remote control lifting device

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
13
Q

Lift calculations may be done for many reasons, name four situations where they must be done.

A

Any lift involving more than one crane

Hoisting personnel

Over 75 capacity for a single crane

Company and site specific rules

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
14
Q

Work must be arranged if it is reasonably practical so that a load does not pass over workers. An operator of a lifting device must not pass loads over workers unless ?

A

No practical alternative exists

And the workers are warned effectively

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
15
Q

Who must ensure that all load ratings are clearly visible and legible on all rigging

A

The employer

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
16
Q

Who must ensure that the rigging is inspected prior to each period of extended use

A

The employer