RECALLED QUESTIONS Flashcards
This is also called as subsurface clearing, removal, and disposal of trees below
the ground surface. (PAES 421).
A. Clearing C. Excavation
B. Grubbing D. Earthwork
B. Grubbing
Solar Powered Irrigation System photovoltaic array should be facing ____
based on efficiency and performance. (PNS/BAFS 324:2021)
A. East C. North
B. West D. South
D. South
Under mechanical ventilating systems of greenhouse, the fans should be
spaced not more than ____ m apart for uniform ventilation. (PAES 415)
A. 3.5 C. 6.5
B. 4.5 D. 7.5
D. 7.5
Suppose you are going to build a machinery shed. What will be the height of the
machinery shed if the machinery is 3.2 m high? (PAES 420)
A. 3.5 C. 3.6
B. 3.7 D. 3.8
A. 3.5
There are concentrated rings in a farmstead. Zone I is for the dwelling area.
What concentrated ring would be on Zone 2?
A. Grain and feed storage
B. Implement and machinery storage
C. Live stock Building
D. Farm access road
B. Implement and machinery storage
In outlet tank, the height of the floor of the chamber from the filling line should
be at least ____m from the filling line plus 15% freeboard. (PAES 413)
A. 0.2 C. 0.3
B. 0.25 D. 0.35
A. 0.2
If an open channel will not become polluted, eave gutters can be omitted, and
roof water can fall to a surface channel with a minimum freeboard of ______ %.
(PAES 414-1)
A. 0.3 C. 0.5
B. 0.4 D. 0.2
C. 0.5
Warehouse window height from the ground shall be _____ m.
A. 1 C. 3
B. 2 D. 4
A. 1
This is the process of converting energy into another form.
A. Transforming C. Inverting
B. Converting D. Transducing
D. Transducing
A device that converts one type of energy into another type.
A. Transducer C. Power Converter
B. Transformer D. AOTA
A. Transducer
Type of thresher wherein the panicles of the cut plants are fed into the threshing
chamber while the stalks are mechanically or manually held during the
threshing operation. (PAES 204)
A. Axial Flow Thresher C. Throw-in Thresher
B. Hold-on Thresher D. Through flow Thresher
B. Hold-on Thresher
What is the duration of continuous test for thresher. (PAES 205)
A. 30 minutes C. 1 hour
B. 15 minutes D. 45 minutes
B. 15 minutes
Interval of testing trials for thresher. (PAES 205)
A. 30 minutes C. 1 hour
B. 15 minutes D. 45 minutes
B. 15 minutes
How many years of experience in the actual implementation of project is
needed to be an evaluator in CPES?
A. 2 C. 4
B. 3 D. 5
D. 5
What is the defect liability period in CPES?
A. 1 year C. 3 years
B. 2 years D. 4 years
A. 1 year
This is a type of milk reconstituted with vegetable oil.
A. Skimmed Milk C. Filled Milk
B. Pasteurized Milk D. Evaporated Milk
C. Filled Milk
Process applied to milk in at least 145°F for not less than 30 minutes.
A. Pasteurization C. Homogenization
B. Sterilization D. Skimming
A. Pasteurization
Condition of equal intensity of light producing no shadow.
A. Diffusion C. Perfect Diffusion
B. Deflection D. Perfect Deflection
C. Perfect Diffusion
What is the unit used for solar battery
A. Volt C. Watts
B. Ampere-hour D. Watt-hour
B. Ampere-hour
Maximum current that a conductor can carry continuously without overload
A. Ampacity C. Conductivity
B. Capacity D. Maximum Capacity
A. Ampacity
Most important step in milk processing considering HACCP
A. Filtration C. Pasteurization
B. Sterilization D. Standardization
C. Pasteurization
Gutter height (m) of multi-span house in greenhouse. (PAES 415)
A. 2.5-2.7 C. 2.3-2.5
B. 2.8-3.0 D. 2.0-2.2
B. 2.8-3.0
Quarried stone specially selected, graded, and placed to prevent erosion and
thereby preserve the shape of a surface, slope, or underlying structure
A. Gabion C. Net
B. Stone wall D. Riprap
D. Riprap
Part of the roadway next to the travelled way or auxiliary lanes that provide
lateral support of base and surface courses, and is an emergency stopping area
for vehicles. (PAES 421)
A. Road Carriageway C. Roadbed
B. Road Shoulder D. Roadway embankment
B. Road Shoulder
Preparation of the sub-grade, in line and elevation, for application of pavement
materials including base and surfacing materials. (PAES 421)
A. Gradient C. Grading
B. Grade D. Gradation
C. Grading
Community nest consists of _____layers.
A. 1-3 C. 2-5
B. 3-6 D. 3-5
B. 3-6
If roofing is made of indigenous materials, the minimum roof slope shall be
_____. (PAES 400 series)
A. 25% C. 58%
B. 38% D. 20%
C. 58%
Organic agriculture act
A. RA 10068 C. RA 8749
B. RA 9003 D. RA 9275
A. RA 10068
Provides heat transfer surface through which heat passes from the hot
refrigerant vapor.
A. Compressor C. Evaporator
B. Condenser D. Suction line
B. Condenser
Command used to restrict cursor movement to specific directions. It allows the
cursor movement only in the vertical and horizontal directions.
A. Auto Snap
B. Isoplane
C. Ortho
D. Grid Snap
C. Ortho
Command used to control and manage the drawings in autoCAD for different
purposes.
A. Isoplane C. Grid Display
B. Dynamic UCS D. Layer
D. Layer
Command used to look for a specified value by searching for it vertically across
the sheet.
A. V look up C. Search
B. Index D. Match mode
A. V look up
Maximum length of greenhouse floor. (PAES 415)
A. 30 m C. 40 m
B. 50 m D. 60 m
B. 50 m
The space requirement for birds 4 weeks old and below. (PAES 402)
A. 5.5 sq. m/100 birds C. 6.25 sq. m/100 birds
B. 6.5 sq. m/100 birds D. 12.5 sq. m/100 birds
C. 6.25 sq. m/100 birds
The step width for goats, staircase type, and elevated type.
A. 300 mm C. 800 mm
B. 500 mm D. 600 mm
C. 800 mm
Suppose you are working in a food processing plant. A contamination had
spread in the plant, what must be the first thing you should do? (HACCP)
A. Stop the processing
B. Conduct clearing in the plant
C. Find the source of contamination
D. Monitor the critical control points
C. Find the source of contamination
It is a reading taken on a position of known coordinates
A. Benchmark C. Backsight
B. Foresight D. Turning Point
C. Backsight
Heating system efficiency for rice hull (biomass) direct-fired mechanical grain
dryer (asked twice) (PAES 201)
A. 65% C. 75%
B. 95% D. 90%
A. 65%
Drying Efficiency Definition (PAES 202 & 242)
A. the total amount of heat utilized to vaporize moisture in the material, expressed in kJ/kg of H
B. The total heat utilized for drying, to the heat available in the fuel expressed in percent
C. mean temperature of the air to be used for drying the grain, measured at a number of points
as close as practicable to its entry to the grain bed
C. A and B
D. B and C
C. A and B
Burning efficiency of the biomass furnace shall be at least ___. (PAES 242)
A. 65% C. 75%
B. 95% D. 90%
A. 65%
Maximum moment at a center span of a simply supported beam with the load at
mid-span.
A. PL/16 C. PL/48
B. PL/12 D. PL/4
D. PL/4
Describes a beam that bends downwards.
A. Buckling C. Sagging
B. Hogging D. Deflection
C. Sagging
According to 2017 World Risk Report, Philippines is ranked ___ as the most
vulnerable country to climate change.
A. 1st C. 3rd
B. 2nd D. 4th
C. 3rd
The amount of solar energy received by or projected onto a surface, expressed
in W/m2
; the sum of all Flux Density and Reflectivity flux density
A. Radiation C. Albedo
B. Radiosity D. Reflectivity
B. Radiosity
This process applied in food kills bacteria by breaking down bacterial DNA,
inhibiting bacterial division.
A. Alpha radiation C. Gamma radiation
B. Beta radiation D. Infrared
C. Gamma radiation
What happens to friction when the road is wet.
A. Increases C. Stays the same
B. Decreases D. NOTA
B. Decreases
This is the part of thresher where the grains are removed from the panicle.
(PAES 204)
A. Concave C. Teeth
B. Drum D. Feeding table
A. Concave
It is simply known as written sanitation standards (process or step implemented
to prevent adulteration and contamination of products
A. HACCP C. SSOP
B. GMP D. HAZOP
C. SSOP
Percent of clay content needed in order for wastes to not penetrate beyond the
soil (PAES 414-1)
A. 10% C. 20%
B. 15% D. 5%
B. 15%
Time interval successive repetition of a periodic wave form.
A. Cycle C. Trough
B. Crest D. Period
A. Cycle
Example of a biochemical conversion of biomass is ____.
A. Gasification C. Combustion
B. Pyrolysis D. Digestion
D. Digestion
Primary component of cell walls.
A. Cellulose C. Hemicellulose
B. Lignin D. Xylan
A. Cellulose
Allows a country with an emission-reduction or emission limitation commitment
under the Kyoto Protocol to implement an emission-reduction project in
developing countries
A. Carbon Credit C. Carbon Development
B. Clean Development Mechanism D. GHG Mechanism
C. Carbon Development
States that if two bodies are in equilibrium with some third body, then they are
also in equilibrium with each other.
A. Zeroth law C. Second Law
B. First law D. Third Law
A. Zeroth law
States that entropy of a perfect crystal at a temperature of zero Kelvin (absolute
zero) is equal to zero.
A. Zeroth law C. Second Law
B. First law D. Third Law
D. Third Law
A continuous-flow dryer in which the product being dried moves in the same
direction as the drying air.
A. Cross-flow type dryer C. Concurrent-flow dryer
B. Counter-flow type dryer D. AOTA
C. Concurrent-flow dryer
A truck with axle loads of 40 kN and 60 kN on a wheel base of 5 m rolls across
a 10-m span. Compute for the value of âxâ
A. 1m c. 5m
B. 2 m D. cannot be determined
R=40kN + 60kN= 100kN
xR=40kN(5m)
X= 200kN.m/100kN
X=2m
Two concentrated loads of 40 kN situated 2 m from the both ends of a 6-m
beam. Compute for the maximum deflection. Assume modulus of elasticity of
200 GPa and moment of inertia of 50 x 106 mm4
đđ. đđ đŚm
