RECALLED QUESTIONS Flashcards
This refers to a vehicle condition in which it moves with no load.
A. Optimum running condition C. Idle condition
B. Low running condition D. NOTA
C. Idle condition
Tractor is at 1st gear, while being pushed by farmers. What should be foot
pressed and released abruptly to start?
A. Brake C. Clutch
B. Accelerator D. NOTA
C. Clutch
This refers to a person or company that sell goods in large quantities
A. Wholesaler C. Reseller
B. Retailer D. AOTA
A. Wholesaler
It is an another term for delayed payment
A. Annuity C. Deferred Annuity
B. Debt D. NOTA
C. Deferred Annuity
This refers to the equipment used for the addition of fuel for increased engine
power.
A. Turbocharger C. Fastcharger
B. Supercharger D. NOTA
B. Supercharger
Main cause of engine’s leak is due to _____.
A. Low Oil Pressure C. BOTH A & B
B. High Oil Pressure D. NONE OF THE ABOVE
A. Low Oil Pressure
Crude oil is mainly composed of _____.
A. Carbon C. Hydrocarbon
B. Hydrogen D. Nitrogen
C. Hydrocarbon
Proportionate saving in costs gained by an increased level of production
A. Scale of economy C. Economy Balance
B. Economy of scale D. NOTA
B. Economy of scale
This refers to the decrease in price of goods/products/services
A. Inflation C. Oversupply
B. Deflation D. Undersupply
B. Deflation
Weight of LOKS filled with water (PAES 112)
A. 16 kg C. 10 kg
B. 12 kg D. 22 kg
D. 22 kg
How many persons shall operate rice combine?
A. 2-3 C. 1-2
B. 3-5 D. 4-6
A. 2-3
Country where ROBIN Engine originates?
A. Indonesia C. Japan
B. America D. Korea
C. Japan
On what year the Agricultural Engineering was introduced to the world?
A. 1907 C. 1892
B. 1903 D. 1957
B. 1903
API stands for ______.
A. American Petroleum Industry
B. American Petrochemical Institute
C. American Petrochemical Industry
D. American Petroleum Institute
D. American Petroleum Institute
This a device that converts electrical to mechanical energy.
A. Rotor C. Engine
B. Motor D. All of the Above
B. Motor
Carabao is _____ times the power of human
A. 0.1 C. 1
B. 10 D. 0.01
B. 10
What is the main product of gasification?
A. Carbon Monoxide C. Carbon Dioxide
B. Hydrocarbon D. Methane
A. Carbon Monoxide
Most abundant microorganisms on the soil
A. Fungi C. Nematodes
B. Bacteria D. All of the Above
B. Bacteria
Stoichiometric air requirement for pyrolysis
A. 20-30% C. 30-40%
B. 10-20% D. 10-30%
B. 10-20%
In the National Building Code of the Philippines, Agricultural Structure belongs
to what group?
A. D C. A
B. C D. J
D. J
What is the definition of Field Efficiency?
just defined as ratio of actual to theoretical ha/hr
Motor which have parallel connection of armature to the windings (PAES 129)
A. Series wound C. Compound wound
B. Shunt wound D. Synchronous
B. Shunt wound
Component that converts animal power to mechanical power
A. Motor C. Rotor
B. Harness D. None of the Above
B. Harness
What is the least used machinery in the Philippines.
A. Harvester C. Stripper
B. Thresher D. Planter
D. Planter
Moldboard Plow Depth of Cut.
A. 3-6 inches C. 3-12 inches
B. 6-12 inches D. 6-18 inches
D. 6-18 inches
Granular spread of fertilizer application
A. Granulation C. Broadcasting
B. Fertigation D. NOTA
C. Broadcasting
When are you going to change of Transmission Oil?
A. 4 months, 22,000 km
B. 6 months, 22,000 km
C. 6 months, 24,000 km
D. 4 months, 24,000 km
C. 6 months, 24,000 km
What causes of quick battery drain?
A. Faulty alternator C. Low battery
B. Faulty converter D. Damaged battery
A. Faulty alternator
Tools used to punch holes
A. Drilling tool C. Holing tool
B. Treading tool D. Boring tool
D. Boring tool
C/N Ratio of agricultural waste
A. 20:30 C. 25:40
B. 30:40 D. 20:40
A. 20:30
This is a process of heat treating and then subjected to cooling.
A. Galvanizing C. Annealing
B. Alloying D. Cooling
C. Annealing
Tax imposed on products that are imported/exported
A. Capital gains tax C. Tariff tax
B. Value-added tax D. Sales tax
C. Tariff tax
Rubber Rollers characterized in terms of speed & direction as _____. (PAES
206)
A. Different speed and direction
B. Different direction; 1 roller is 25%
faster than the other
C. Same speed and direction
D. Same direction; 1 roller is 255
faster than the other
B. Different direction; 1 roller is 25%
faster than the other
Operating width is primary affected by _____.
A. Length C. Speed
B. Width D. NOTA
B. Width
A knocking sound produced due to incomplete combustion of fuel inside the
combustion chamber of an engine.
A. Ignition C. Carburetion
B. Detonation D. NOTA
B. Detonation
Life of machine is affected by: _____.
A. Weather C. Quality of materials
B. Usage D. AOTA
C. Quality of materials
Market competition where there is small number of producers/sellers
A. Monopoly C. Oligopsony
B. Oligopoly D. Pure Competition
B. Oligopoly
Diesel fuel rating is _____.
A. ethane C. octane
B. butane D. cetane
D. cetane
It is the condition where piston is at the top dead center
A. Clearance volume C. Total Volume
B. Piston Displacement Volume D. NOTA
A. Clearance volume
Walking-Type Agricultural Tractor/Power Tiller Tested in ____ Area size.
A. 1 Ha C. ½ ha
B. 2 Ha D. 2 ha
A. 1 Ha
Law that is not associated to ABE Law/RA 10915.
A. RA 10068 C. RA 9367
B. RA 8435 D. RA 8749
C. RA 9367- Biofuels Act of 2006
Definition of ABE in RA 10915 excludes the _____.
A. Safe food C. Fiber
B. Feed D. Raw materials
D. Raw materials
Farmer is poor, what aid does he needs?
A. post-harvest facilities C. farm-to-market road
B. credit assistance D. All of the Above
B. credit assistance
Crop harvests deteriorates easily, what needs to be done to address the
problem?
A. post-harvest facilities C. farm-to-market road
B. credit assistance D. All of the Above
A. post-harvest facilities
it play a crucial role in rural transportation networks by connecting agricultural areas to markets and other essential services.
A. post-harvest facilities C. farm-to-market road
B. credit assistance D. AOTA
C. farm-to-market road
You are an ABE, you will conduct a project. What will you do first?
A. Feasibility Study C. Evaluation Report
B. Technical Specification D. NOTA
A. Feasibility Study
What needs to be presented if needed to show a detailed plan?
A. Feasibility Study C. Evaluation Report
B. Technical Specification D. NOTA
B. Technical Specification
Most important part to determine if the project is successfully implemented
A. Feasibility Study C. Evaluation Report
B. Technical Specification D. NOTA
C. Evaluation Report
Power relates to Water Power
A. Hydraulic Power C. Drawbar Power
B. PTO
A. Hydraulic Power
Power relates to Starting of the Machine
A. Hydraulic Power C. Drawbar Power
B. PTO
B. PTO
Power relates to Implement Power
A. Hydraulic Power C. Drawbar Power
B. PTO
C. Drawbar Power