2022 Flashcards
The primary factor that affects the performance of a spryer.
a. spraying time
b. spraying speed
c. spray-particle size
d. spray materials
c. spray-particle size
Agricultural and Biosystems Engineering refers to the
application of engineering science and design to processes and systems involved in the sustainable production, post-production, and processing of _________, EXCEPT.
a. safe food
b. feed
c. row materials
d. fiber
c. row materials
(RA 10915 Article III, Section 24) The board shall have the power, upon notice and hearing, to revoke or suspend the COR or a registered and licensed Agricultural and Biosystems Engineer for
any of the following grounds, EXCEPT.
a. Gross incompetence, negligence, or ignorance in the conduct of the profession resulting to death, injury of persons and/or damage to property.
b. Not practicing of profession.
c. Addiction to a drug or alcohol…..
d. Unjustified refusal to join or to remain a member in good standing of the AIPO
b. Not practicing of profession.
How many times greater is the power of a carabao over man?
a. 0.1
b. 1.0
c. 10
d. 100
c. 10
Which of following is an example of biochemical conversion of agricultural wastes? (Not the exact wordings)
a. gasification
b. pyrolysis
c. anaerobic digestion
d. combustion
c. anaerobic digestion
Crude oil is composed of ____.
a. hydrocarbons
b. hydrogen
c. carbon
d. oxygen
a. hydrocarbons
The air requirement for the pyrolysis of agricultural waste ranged from
a. 10-20% SA
b. 20-30% SA
c. 30-40% SA
d. 20-40% SA
A type of proprietorship where there is an arrangement between two or more people to oversee business operations and share its profits and liabilities.
a. sole proprietorship
b. partnership
c. cooperative
d. corporation
b. partnership
Given the Present worth, nominal interest, and compounding period. Calculate the future worth.
F= P(1+r/m)^nm
The following are the most essential elements for ignition, EXCEPT:
a. air
b. fuel
c. fire
d. carbon
d. carbon
The primary gas produced during gasification.
a. methane
b. carbon dioxide
c. carbon monoxide
d. nitrogen oxide
c. carbon monoxide
Four-wheel tractors are characterized as:
a. low speed-low torque
b. high speed-high torque
c. low speed-high torque
d. high speed-low torque
c. low speed-high torque
All agricultural and fisheries machinery assemblers, manufacturers, importers, suppliers, distributors and dealers are required to provide after-sales service and warranty to their respective clients which:
I. shall be monitored by the agriculture offices of the LGUs
II. shall be monitored by the Bureau of Agricultural and
Fisheries Engineering (BAFE)
III. in accordance with the PAES or with the warranty policy of the manufacturer, whichever is more advantageous to the client
IV. shall be accompanied by a warranty card which shall specify the after-sales service policy.
a. I and II
b. I and III
c. IV
d. I,II,III and IV
e. none of the above
d. I,II,III and IV
An act promoting agricultural and fisheries mechanization development in the country, also known as the “Agricultural and Fisheries Mechanization (AFMech)Law?
a. RA 10061
b. RA 10915
c. RA 10661
d. RA 10601
d. RA 10601
This Decree shall be known and cited as the “Agricultural Investments Incentives Act”.
a. PD 1181
b. PD 1529
c. PD 1159
d. RA 1919
c. PD 1159
In what law does National Building Code enacted?
a. RA 10601
b. RA 10915
c. PD 1096
d. RA 6541
d. RA 6541
An act mandating and strengthening the continuing professional development program for all regulated professions, creating the continuing professional development council, and appropriating funds therefor, and for other related purposes, also known as “Continuing Professional Development Act of 2016”
a. RA 10601
b. RA 10915
c. RA 10921
d. RA 10912
d. RA 10912
An act providing for the modernization, standardization and regulation of the procurement activities of the government and for other purposes, also known as “Government Procurement Reform Act”
a. RA 9184
b. RA 7160
c. PD 1445
d. RA 10912
d. RA 10912
The seal of an Agricultural and Biosystems Engineer shall be circular in shape with
_______ diameter
a. 41 mm
b. 44mm
c. 45mm
d. 42 mm
d. 42mm
They are rules of conduct of any organized society, however simple or small, that
are enforced by threat of punishment if they are violated.
a. contracts
b. ethics
c. law
d. policy
e. none of the above
c. law