Recall Items Flashcards
Aborted Engine Start
- Engine start lever (affected engine)…CUTOFF
Airspeed Unreliable
- Autopilot (if engaged)…Disengage
- Autothrottle (if engaged)…Disengage
- F/D switches (both)…OFF
- If necessary to stabilize the aircraft, set the following gear-up pitch attitude and thrust:Flaps extended…10° and 80% N1Flaps up…4° and 75% N1
APU FIRE
- APU fire switch…Confirm…Pull, rotate to the stop, and hold for 1 second
- APU switch…OFF
CABIN ALTITUDE WARNING or
Rapid Depressurization
- Don oxygen masks and set regulators to 100%
- Establish crew communications.
ENGINE FIRE or
Engine Severe Damage or
Separation
- Autothrottle (if engaged)…Disengage
- Thrust lever (affected engine)…Confirm…Close
Engine Limit Surge or Stall
- Autothrottle (if engaged)…Disengage
- Thrust lever (affected engine)…Confirm…Retard until indications stay within limits or the thrust lever is closed
LANDING CONFIGURATION
- Assure correct airplane landing configuration
Loss of Thrust on Both Engines
- ENGINE START switches (both)…FLT
- Engine start levers (both)…CUTOFF
- When EGT decreases: Engine start levers (both)…IDLE detent
Runaway Stabilizer
- Control column…Hold Firmly
- Autopilot (if engaged)…Disengage
Do not re-engage the autopilot.
Control airplane pitch attitude manually with control column and main electric trim as needed.
- If the runaway stops:
····
- If the runaway continues:
STAB TRIM CUTOUT switches (both)…CUTOUT
If the runaway continues:
Stabilizer trim wheel…Grasp and hold
WARNING HORN (INTERMITTENT)
or
WARNING LIGHT - CABIN ALTITUDE OR TAKEOFF CONFIGURATION
- **If **the intermittent warning horn sounds or a CABIN ALTITUDE light (if installed and operative) illuminates in flight at an airplane flight altitude above 10,000 feet MSL:
Don the oxygen masks and set the regulators to 100%.
Establish crew communications
- If the intermittent warning horn sounds or a TAKEOFF CONFIG lights (if installed and operativ) illuminates on the ground:
Assure correct airplane takeoff configuration.
Evacuation Flow/Philosophy
- Stop
- Configure
- Shut Down
- Evacuate