Propellers Flashcards
What is the purpose of a propeller
To create thrust in either pull or push the airplane through the air
What are the two types of propeller Configurations
Tractor type and pusher type
What type of propeller has a blade angle built into the propeller and cannot be changed
A fixed pitch propeller
What is the purpose of the metal tipping on the leading edge of a wooden propeller
Protects the propeller from damage caused by FOD, During landing, taxing, and takeoff
What tool is used to determine propeller blade angle
A universal propeller protractor
What are the arrow dynamic forces and loads acting on a rotating propeller blade
Centrifugal force, aerodynamic twisting, centrifugal twisting, torque bending, and thrust bending forces
What is the meaning of a propeller blade back and face
Back is curved, face is flat
What should be used to clean aluminum and steel propeller blades and hubs
They should be washed with a suitable cleaning solvent using a brush or cloth
What position are used on a balance stand to check a two plated propeller for static balance
First the vertical position, and then the horizontal position
Can a fixed pitch propeller’s Pitch be changed
No
Why do you put the blades of counterweight propeller into high pitch before stopping the engines
Protects from dirt and moisture in the air, this is particularly important if the airplane engine will not be operated for several days
Why are cones installed on spline shafts with a propeller
The cone Centers the propeller on the shaft as they are forced towards each other by the tightening of the retaining nut
How is feathering accomplished on a constant speed counterweight propeller
By releasing the governor oil pressure on the counter weights
What type of systems are used for deicing propellers
Fluid or electrical the icing systems
What is the purpose of a slinger ring On some propeller installations
Propeller deicing fluid is ejected from the stationary nozzle on the engines into a U-shaped channel attached to the rear of the propeller assembly. This channel is called the slinger ring. The fluid under pressure uses and Trickle force transferred through the small tube to the propellers leading edge