Printer Maintenance

Question 1

You replaced the print cartridge on it inkjet printer. What should you do next?

– Replace the fuser roller assembly
– Calibrate the printer
– Replace the ribbon as well
– Send the printer to the factory for realignment

Answer 1

Calibrate the printer

Question 2

Your troubleshooting and older laser printer that is creating accordion jams where the paper is crumpled as it exit the printer moving into the output tray. What can you do to fix this problem?

– Replace the toner cartridge
– Replace the fuser wires
– Replace the drum
– Install in maintenance kit
– Use heavier paper

Answer 2

Install in maintenance kit

Question 3

Which of the following problems is a common for a dotmatrix printers?

– The Corolla wire is broken
– The printhead is clogged with dry ink
– The printer is out of toner
– Papers Scraps are caught in the feed mechanism

Answer 3

Papers Scraps are caught in the feed mechanism

Question 4

For the past several days, the printer jobs from the inkjet printer or missing colors and leaving gaps. What should you
Resolve the problem?

– Recalibrate the printers color profile
– Add additional memory to the printer
– Check the gap between the printer head and the paper
– Use the automatic cleaning feature

Answer 4

Use the automatic cleaning feature

Question 5

You have just installed a maintenance kit in your laser printer what should you do next?

– Reset the page count
– Check the gap between the printer head and the paper
– Reinstall the printer drivers
– Use the automatic cleaning feature

Answer 5

Reset the page count

Question 6

You’re conducting scheduled maintenance on a laser printer. You notice that there is a buildup of excess toner inside the interior of the printer. Which of the following is the proper way to remove it?

– Blowed out with compressed air
– Sweep it out with a small broom
– Using antistatic vacuum
– Wipe it out with a wet, soapy rag using a mild detergent

Answer 6

Using antistatic vacuum