pressurization

Question 1

Automatic transfer of the pressurization controllers occurs after ____ or in case of failure of the ___ controller

Answer 1

landing,
operating

Question 2

Before takeoff and after landing, the outflow valve should be ____ and the cabin _____

Answer 2

OPEN
Depressurized

Question 3

The autmomatic pressurization controller normally uses landing eleveation QNH from the

Answer 3

FMGC

Question 4

during descent the cabin pressure is controlled so that

Answer 4

it reaches landing field pressure just prior to landing

Question 5

how is the landing field elevation provided to the pressurization system in the case of a divert to an alternate?

Answer 5

The FMGC provides database elevation when a new destination is entered

Question 6

if the airplane returns to the departure airport immediately after the after takeoff, how is the cabin altitude controlled?

Answer 6

Cabin altiutude automatically returns to the takeoff elevation

Question 7

how is the cabin altitude controlled when in the manual mode?

Answer 7

by toggling the MAN V/S CTL switch

Question 8

in case of failure of both pressurization controllers, a third motor provides

Answer 8

Manual operation of the outflow valve

Question 9

illumination of the MODE SEL FAULT light indicates

Answer 9

A fault is detected in both automatic systems

Question 10

The cabin safety valve protects against

Answer 10

Excessive differential pressure

Question 11

What elevation is set on the LDG ELEV selector?

Answer 11

500 ft

Question 12

whan landing elevation is selected with the LDG ELV selector, the cabin altitude is

Answer 12

still controlled automatically through the outflow valve

Question 13

how is the pressurization system controlled manually

Answer 13

Selecting MODE SEL switch to MAN and using the MAN V/S CTL switch to control the outflow valve