PPE

Question 1

Helmet starts to deform at ___ and fully fails at ___ degrees

Answer 1

297, 350

Question 2

Helmet chinstrap is ___” and made of _____

Answer 2

3/4”, Nomex webbing

Question 3

Clean helmet with ___ with a pH of ___ and ___ water.

Answer 3

mild soap, 7-8, warm

Question 4

Materials in the helmet suspension liner include ___, ___, ___, and ___.

Answer 4

high-density polyethylene plastic, fire-retardant cotton, triethylene nylon, Nomex

Question 5

Flash hood is composed of ___% ___ and ___% ___.

Answer 5

20% PBI, 80% Lenzing fabric

Question 6

Flash hood starts to char at ___ degrees and decomposes at ___ degrees. Nomex decomps at ___ degrees.

Answer 6

700, 1300, 700

Question 7

Morning Pride turnouts’ outer shell is ___% ___ and ___% ___ .

Answer 7

60% Kevlar, 40% Nomex

Question 8

The outer shell of the Morning Pride turnouts starts to char at ___ to ___.

Answer 8

660-900 degrees

Question 9

Morning Pride turnouts’ moisture barrier is “___” material ___ onto a ___ cloth.

Answer 9

Crosstech, laminated, Nomex/Kevlar

Question 10

The thermal layer of Morning Pride turnouts is ___ ___ batting.

Answer 10

Nomex quilted

Question 11

Shoulders on the Morning Pride turnouts are ___ with ___ material.

Answer 11

reinforced, double

Question 12

Reflective tape on the Morning Pride turnouts give off ___ of reflected light.

Answer 12

6 lumens

Question 13

The DRD system on Morning Pride turnouts has a ___” pull tab rated at ___lbs, and 2 ___” loops rated at ___lbs.

Answer 13

12”, 3500, 39”, 1000

Question 14

Pro-Tech Fusion-T structure gloves contain a ___ called ___, which is ___, ___ and ___ resistant, and ___.

Answer 14

barrier, Porelle PTFE, waterproof, bloodborne pathogen- and chemical-, breatheable

Question 15

Pro-Tech Fusion-T structure gloves are made of ___ leather, which stays ___ after ___.

Answer 15

goatskin, flexible, drying

Question 16

Pro-Tech Fusion-T structure gloves are lined with ___ for ___ resistance.

Answer 16

Kevlar, cut

Question 17

Pro-Tech Fusion-T structure gloves are stitched with ___-___ ___ thread throughout.

Answer 17

high-burst Kevlar

Question 18

The Pro-Tech Fusion-T structure glove feature an ___-layer ___ guard system which contains ___ fused into the ___.

Answer 18

8, knuckle, silicone carbide, Kevlar

Question 19

The inner liner of the Pro-Tech Fusion-T structure gloves is 100% ___, which is ___ and makes them easy to ___ and ___.

Answer 19

modacrylic, antimicrobial, don, doff

Question 20

NFPA ___ requires the pulling capacity of gloves to be ___ when ___ and ___ when ___.

Answer 20

1971, 80%, dry, 70%, wet

Question 21

The Thoroughgood Hellfire turnout boots protect from electrical hazards up to ___ of ___ and ___.

Answer 21

600 volts, AC, DC

Question 22

The Thoroughgood Hellfire turnout boots feature ___ rubber construction, which means individual piece are ___ together instead of simply ___. ___ rubber incorporates ___ or similar materials which increase ____.

Answer 22

vulcanized, baked, glued, vulcanized, sulphur, durability

Question 23

The Thoroughgood Hellfire turnout boots feature ___ ___ lining.

Answer 23

Kevlar knit

Question 24

The Crew Boss brush jacket and pants feature ______, which is a fabric composed of ___% ___, ___% ___, and ___% ______ fibers.

Answer 24

Nomex IIIA, 93% Nomex, 5% Kevlar, and 2% anti-static

Question 25

The ___ at the bottom of the Crew Boss brush pants are ___” long for easy donning and doffing, as well as ___ straps for ___ ___.

Answer 25

zipper, 13”, Velcro, cinching ankles

Question 26

Brush shirt is a blend of ___% ___, with ___ and ___ composing the rest.

Answer 26

51% aramids, rayon, nylon

Question 27

Brush gloves are made of ___ leather, which is a lesser choice in terms of ___ and ___ ___, but they are very ___-, ___-, and ___- resistant.

Answer 27

pigskin, durability, hand feel, oil, weather, heat

Question 28

Brush gloves utilize a ___ thumb, while our ___ gloves have a ___ thumb, which is better for ___.

Answer 28

keystone, work, straight, gripping

Question 29

Brush gloves feature a ___ wristlet with ___ stitching.

Answer 29

Nomex, Kevlar

Question 30

Eye protection can vary, but all meet ________ standards. The lenses are ___ and have ___, ___, and ___ coatings.

Answer 30

ANSI Z87.1, polycarbonate, UV, anti-fog, anti-scratch

Question 31

The ESS brush goggles feature ___ and ___ coatings, and survive a ___ degree for ___ minutes oven test.

Answer 31

anit-fog, anti-scratch, 350, 5

Question 32

The work uniform is made of _______ fabric, which is ___% ___, ___% ___, and ___% ___ fibers.

Answer 32

Nomex IIIA, 93% Nomex, 5% Kevlar, 2% anti-static

Question 33

The uniform work shirt features ___ creases and ___” block lettering on the ___ breast; the pants have a solid ___ zipper and ___ creases.

Answer 33

sewn-in, 1/2”, right, brass, permanent

Question 34

The approved LAFD t-shirt ___ be worn under the uniform work shirt.

Answer 34

may (not shall)

Question 35

Haix work boots have a ___ protective toe cap and a ___ shank which is ___-___. They are ___-rated for ___ hazards.

Answer 35

carbon-fiber, fiberglass, puncture-resistant, ASTM, electrical

Question 36

Haix work boots feature “___” inner liner, which is ___, ___, ___-, ___-, and ___-resistant.

Answer 36

CROSSTECH, waterproof, breathable, bacteria, chemical, blood-borne pathogen

Question 37

Work gloves are made of ___ and feature a ___ thumb.

Answer 37

cowhide, straight

Question 38

Point Blank body armor is constructed of ___-___ of ___.

Answer 38

multi-layers of Kevlar

Question 39

HVVs are made of 100% ___ ___ with ___-___ ___ that minimize the risk of ___.

Answer 39

polyester mesh, 5-point breakaways, entanglement

Question 40

HVVs shall NOT be worn when?

Answer 40

fire suppression
physical-extrication
HazMat
IDLH
incidents that require immediate action
any time wearing would prove more dangerous than the risk posed by traffic

Question 41

HVVs should be washed in ___, and ___ dried. They can last ___ cycles of washing.

Answer 41

warm water, line, 25