PPE Flashcards
How much of the body is structural fire fighting PPE designed to cover?
Every square inch
Which of the following is safe to wear under turnout gear?
A) Nylon
B) Polyester
C) Nomex
D) Cotton/Polyester Blend
C) Nomex
A structural firefighting PPE ensemble includes which specific piece of equipment?
Self Contained Breathing Apparatus (SCBA)
What other application, if any, is structural fire fighting PPE designed for?
A) All Others
B) Water rescue only
C) Hazmat Operations
D) None
D) None
Which part of the structural firefighting PPE ensemble is designed to protect the neck and ears?
The Protective Hood
Turnout coats consist of ___ layers.
3
What is a flame resistant material used in PPE?
PBI
Manufacturers should provide users of PPE with which of the following information?
Cleaning Instructions
When is it acceptable to remove the inner thermal layer from a turnout coat?
When the coat is being cleaned
What is the approved material for structural fire fighting boots?
Leather
The biggest disadvantage of the common rubber boot used in structural firefighting is that it:
Has a sloppy fit
What is the purpose of a personal alert safety system (PASS)?
Sound an alarm if a firefighter is motionless for a set period of time.
PASS devices are designed to assist rescuers attempting to:
Locate trapped fire fighters
How long does it take for the PASS device to alarm if the wearer becomes inactive?
30 Seconds
What piece of equipment must be worn with structural firefighting PPE and SCBA?
PASS Device
Which statement about care and use of PPE is correct?
A) Damp turnout coats provide an extra degree of thermal protection
B) In hot weather, resist the temptation to remove your turnout coat when at the rehabilitation station
C) Special cleaning solutions are available for home laundering of turnout coats
D) Accumulated dirt or contamination reduces the protective quality of turnout coats
D) Accumulated dirt or contamination reduces the protective quality of turnout coats.
Fire fighters should be able to don PPE clothing within ___ seconds>
60
The primary function of a fire helmet’s __ is intended to provide thermal protection.
Inner Liner
To improve dexterity with gloves, be sure to have a good fit and:
Practice with the gloves
Which statement about the use of a protective hood is correct?
A) It is optional if a helmet equipped with fire resistive neck/ear flaps is worn
B) Any method used for donning the hood is acceptable as long as the SCBA face piece is tested and in tact.
C) First don the hood and then apply the SCBA face piece straps over it making sure the hood is clear of the seal.
D) Don the SCBA face piece first and then pull the hood up over it.
D) Don the SCBA face piece first and then pull the hood over it.
What is the requirement for structural firefighting boots?
Slip-resistant sole
Which term is an optional component of the structural firefighting ensemble?
Hearing Protection
The thick, quilted layer of a turnout coat is the ___.
Thermal barrier
Which component of structural turnout coats is critical for protecting the body from steam burns?
Moisture barrier
The wearing of synthetic material under wildland PPE is:
unacceptable if the synthetic material can melt and cause severe burns
A fire shelter is a:
Last resort protective device for firefighters caught or trapped in an environment where fire storm or blow-up is imminent
Which is not a specific need of wildland firefighting PPE?
A) Firm ankle support
B) Lightweight material that provides breathability
C) Heavyweight material that reflects radiant heat
D) Hot ember protection
C) Heavyweight matieral that reflects radiant heat.
