Paper and board stock forms Flashcards
standard paper stock forms
A0, A1, A2, A3, A4, A5, A6
A4 is the most common
commercial printers use untrimmed paper
to allow for bleed on printed products that would be then trimmed into an A size
paper colour
originally light tan or beige and then bleached white during manufacturing process when it is still in pulp form
laminated
overlay with a layer of plastic or some other protective material
layout paper
white translucent paper with a smooth surface
cartrigde paper
off white paper with a slightly textured surface
tracing paper
translucent paper slightly thicker than layout paper
bleed proof paper
similar to cartridge paper but has a bleedproof layer on one side to prevent colours from running
treated paper
plain paper with a clear binder or dye layer applied to help hold the image on the paper surface and brighten the image. surface sheens such as high gloss or matt available
watercolour paper
available in absorbent, smooth, hot pressed or more textured cold-pressed and heavily textured rough
corrugated card
usually with carton board out outer layers and a corrugated middle layer giving the material the ability to provide protection against impact
bleached card
chemically treated to brighten the surface to make it suitable for high quality printing
mount card
made from compressed fine cotton fibres to produce a rigid board
duplex card
made up of two layers of paper with the exterior often coated to make it more water resistant and to give it a glossy sheen and waxy feel
foil-backed and laminated card
card with polymer film or foil applied to either one side or both sides to provide a water resistant or heat insulating layer. floil or laminated layer has to be removed before recycling the paper pulp