Oral notes Flashcards
Yes sir here is basically what we did. Started off with a weight and balance. Then he asked some questions about the release like where to find landing distances and Planned runways to be used for takeoff and landing. Then we went over EPCs almost every single one. Then limitations almost all of them from section 2 CFM. I used the limitations from the study guide to study. It was all of those plus CAT II wind limitations. Max crosswinds. Length Height Wingspan and turning radius. Then we went through almost every slide on the walk through PowerPoint. Asked about what I’m checking for. Some tricky ones from that were what are you checking in the forward and aft cargo. What are the three electrical wires for on the main landing gear. The three vents under the wing, strobe light RAM NACA vent, NACA vent for surge tank and pressure relief valve. Then we went over how to walk in to a cold dark airplane. What emergency equipment and other equipment in the cockpit you do in the internal safety inspection, before power up. Then power up flow. What lights up with battery only. Then went into IDG questions. Then RAT deployment. Then questions about APU fire sequence of buttons. Then the red guarded switches on hydraulic panel. Talked about the PTU. The red guarded flight control switches. Dump Button switch. Asked about how the flight control system works. Asked about when the speed brake auto stows. Then we were done. Gave me some homework on some questions I missed and that was it.
.
