Oral: Autoflight Questions Flashcards

Know

1
Q

When will the FGCS automatically select half-bank? What is the bank angle?

A
  • FL250

* 17° bank angle

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
2
Q

What is FPA?

A
  • Flight Path Angle is a pilot-selectable pitch attitude (in degrees) of climb or descent
  • FGCS adjusts thrust & pitch to maintain path angle and airspeed
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
3
Q

What does the TOGA button do?

A
  • On ground&raquo_space;> Activates takeoff guidance crossbars

* In flight &raquo_space;> Activates Go-Around guidance

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
4
Q

What do the takeoff guidance crossbars do?

A
  • Maintain extended runway centerline

* Maintain pitch guidance according to slat/flap setting

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
5
Q

When is the TOGA mode deactivated?

A
  • Another vertical mode is selected
  • Autopilot is activated
  • TCS button is pressed
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
6
Q

When will the FD automatically display?

A
  • TOGA button is pressed
  • Autopilot is activated
  • Windshear detection
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
7
Q

What is the function of the TCS button?

A
  • Allows manual override of the autopilot
  • When released, airplane maintains new altitude (provided ALT was the active vertical mode) but will return topreviously lateral mode (except ILS, autopilot will recapture the LOC/GS)
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
8
Q

What will disengage the autopilot?

~9 events~

A
1 - AP button on GP is pushed
2 - Any manual pitch trim is activated
3 - Either AP/TRIM DISC button is pushed
4 - Stick shaker activated
5 - Windshear escape guidance is activated
6 - Flight controls in direct mode
7 - Aileron or elevator controls disconnected
8 - Overpowering the yoke
9 - Internal system failures
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
9
Q

Can the yaw damp be deactivated if the autopilot is on?

A

Yes, it is independent of the autopilot

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
10
Q

When will the auto-throttles engage on the ground? In flight?

A
  • On ground —> AT TO (GP) is armed & TLA > 50°

* In flight AT —> (GP) is armed & airplane > 400 ft AGL

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
11
Q

Will the auto-throttles compensate for gusty wind conditions?

A

•Yes, up to 5 kts

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
12
Q

What will disengage the auto-throttles?

A
  • AT(TL or GP) is pushed
  • TLA difference > 8°
  • TL at idle with weight-on-wheels or wheels spinning
  • Internal system failures
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
13
Q

What is SPDe?

What mode uses SPDe?

A
  • Speed on Elevator, thrust is fixed and pitch is adjusted to maintain airspeed (VS changes)
  • FLCH uses SPDe for climbs and descents
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
14
Q

What is SPDt?

What modes use SPDt?

A
  • Speed on Thrust, thrust is adjusted to maintain selected airspeed
  • FPA, VS, GS, ALT, ASEL
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
15
Q

What are the AT modes?

A

SPDe, SPDt, TO, GA, HOLD, RETARD (@ 30 ft RA)

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
16
Q

What does LIM & OVRD mean on the FMA?

A
  • LIM - The selected vertical mode requires more or less engine thrust than is available
  • OVRD - The TL are being manually moved (no AP disengagement)
17
Q

When is CRZ automatically selected?

A
  • When +100 ft of selected altitude for 90 seconds

* Desired airspeed must be achieved or it will remain in CLB mode

18
Q

What does the SRC button do?

A

Selects pilot or co-pilot as the data source for the AFCS

19
Q

What does thered AP/TRIM DISC button on the yoke do?

A
  • Disconnects the autopilot

* Stops all trim actuation if button is pushed and held

20
Q

What does the PREV button do?

A
  • Allows the capture of ILS/BC course while still using the FMS as the basic NAV source provided the AUTO
  • TUNE function is enabled on the MCDU and the approach is loaded in the FMS