Nightlight

Question 1

What should your nightlight be

Answer 1

It must automatically turn on when it starts to get dark so that it is quick and convenient to
use.
It must be energy efficient so it does not waste battery power.
It must be bright but not too bright that you couldn’t sleep at all

Question 2

LED
What does it stand for
Which leg is which

Answer 2

Light Emitting Diode

Positive leg is the longer one, negative leg is the shorter one

Question 3

Safety when using Solder iron

Answer 3

Never touch the tip of the soldering iron (400°C)
Hold wires that have to be heated with tweezers or clamps.
Keep the cleaning sponge wet during use.
Always return the soldering iron to its stand when not in use.
Never put it down on the workbench.
Turn unit off and unplug when not in use.

Question 4

Tools used 
Hegner saw
Linisher 
Pillar Drill
Hand File 
Polisher
Mallet

Answer 4

Hegner saw - Cutting the material Linisher - Shaping and smoothing
Pillar Drill - Making circular holes
Hand file - Removing waste material
Polisher - Smoothing and to make shiny
Mallet - Hammering the dowel into
position