Network Media Types Flashcards
Which of the following categories of UTP cabling are commonly used for
1000BASE-T networks? (Choose two.)
a. Cat 5
b. Cat 5e
c. Cat 6
d. Cat 6f
Answer: b, c. Cat 5e and Cat 6 are often used for Fast Ethernet networks.
Which type of cable might be required for installation in a drop ceiling that is
used as an open-air return duct?
a. Riser
b. Plenum
c. Multimode
d. Twinaxial
Answer: b. Plenum cable is a special type of cable for use in the plenum
spaces.
Which of the following is the eight-pin connector found in most Ethernet
networks?
a. RJ11
b. RJ45
c. DB-9
d. ST
Answer: b. The RJ45 connector uses eight pins and is the most common connector used in Ethernet networks.
What are the two major categories of fiber-optic media? (Choose two.)
a. Straight-through
b. Single-mode
c. Unshielded
d. Multimode
Answer: b, d. The two major categories of fiber-optic media are single-mode
and multimode.
What is the speed of Fast Ethernet?
a. 1Mbps
b. 100Mbps
c. 1Gbps
d. 10Gbps
Answer: b. Fast Ethernet operates at 100Mbps.
What is a common fiber-optic cable management component for terminating
many connections?
a. A fiber distribution panel
b. An IDF
c. A 110 block
d. A plenum
Answer: a. A fiber distribution panel is often used in the fiber media environment for terminating media.
What Ethernet UTP cable was the first standard cable to carry data at speeds
of 1Gbps?
a. Cat 4
b. Cat 5
c. Cat 5e
d. Cat 6
Answer: c. Cat 5e is an enhanced version of Cat 5. Cat 5e was the first standard for 1Gbps Ethernet.
What type of connector is often used for cable TV (including cable modem)
connections?
a. Krone
b. BIX
c. F-type
d. UPC
Answer: c. An F-connector, or F-type connector, is often used for cable TV
(including cable modem) connections.
Which standards were developed to define industry-standard pinouts and
color coding for twisted-pair cabling? (Choose two.)
a. CWDM
b. TIA/EIA-568A
c. DWDM
d. TIA/EIA-568B
Answer: b, d. To define industry-standard pinouts and color coding for
twisted-pair cabling, the TIA/EIA-568 standard was developed. The first
iteration of the TIA/EIA-568 standard has come to be known as the TIA/
EIA-568A standard, and since then, an updated standard called TIA/EIA-568B
has been released. TIA/EIA-568B is the more commonly used standard in the
United States today.
What fiber type would you use if the requirements to be met included an SMF
media type, 1Gbps bandwidth capacity, and a distance limitation of 5 km?
a. 1000BASE-LX
b. 1000BASE-SX
c. 1000BASE-TX
d. Thicknet
Answer: a. 1000BASE-LX uses single-mode fiber (SMF), has a bandwidth
capacity of 1Gbps, and has a distance limitation of 5 km.