Must know

Question 0

Standard config sequence for approach

Answer 0

1NM out/1dot below: Flaps App, FAF: gear down, init. descent, missed app alt set, ATC report established, final check, next OM check.

Question 1

Localizer established

Answer 1

Set Nav 2 to LLZ/ILS, ATC report established.

Question 2

Proceed to XY and hold means automatically for G1000

Answer 2

Direct to XY and OBS mode

Question 3

Avionic setting / Nav update Package

Answer 3

FLPN (GPS)
COM recheck
NAV
ADF
CDI (GPS oder NAV 1/2)
RMI (GPS oder NAV 1/2)
DME normal NAV1 
APA
Transponder

Question 4

Altimeter setting call out

Answer 4

Altimeter STD/QNH…. reading FL/ft….. (Compare with stby Alti within 45 ft) report compared / Stby to go

Question 5

Sequence systematic for approach preperation

Answer 5

• Analyse ATIS: wind, rwy, vis, ceiling, and type of appr
• 1. GPS / 2. NAV update
• approach briefing
• Check for approach
• landing light on

Question 6

Sequence systematic after TO or GA

Answer 6

• Profile complete
• AP on
• climb check
• Note take off time/complete OFP for ETA
• Nav update perform

Question 7

OM check

Answer 7

QNH.... checked
Altitude... high/low
Missed app alt...set
Minimum....
OM check complete

Question 8

Systematic for Altitude/ FL change

Answer 8

Set new alt on APA, select Mode in FD/AP, “1000 to go, altimeter STD/QNH. 300,100, Alt captured”

Question 9

G1000 PWR up

Answer 9

PWR up: no warning, valid Database
AUX 3+4 data fields and profile, AUX 5 CDI auto
MAP: HDG up, Range and Disp (TOPO, Stormscope, DCLT - 1)

Question 10

Beim Approach Holding umgehen

Answer 10

Activate Vectors to final oder activate leg

Question 10

Leg aktivieren

Answer 10

Menü activate leg