Mod 7.5 (5) Flashcards
In the part number 65-77549017, What does the first number identify?
The 1st - The Company The 2nd - The size or type The 3rd - Drawing/Serial number
LEARN
Airbus ATA Chapters List
Section 1
Section 2
Section 3
Section 4
What does ATA stand for?
Air Transport Association of America
What does ADCN stand for?
Where would you find ADCN’s on a drawing?
Advance Drawing Change Notice.
On the top right corner or stapled onto the bottom.
What is an auxillary drawing?
An auxillary drawing shows a view of an object that is not at a 90 degree angle to the face of an object.
What colour paper are TEMPORARY REVISIONS issued on?
Yellow.
What do these stand for?
AN
MS
MILSPEC
NAS
AS
SAE
AS
ATA
BPS
CAA
EASA
FARs
ISO
FAA
AN Airforce Navy Standard
MS Military Standard
MILSPEC Military Specification
NAS National Aerospace Standard
AS Aeronautical Standard
SAE Society of Automotive Engineers
AS Aerospace Standard
ATA Air Transport Association
BPS Boeing Process Standard
CAA Civil Aviation Authority
EASA European Aviation Safety Agency
FARs Federal Aviation Regulations
ISO International Standard Organisation
FAA Federal Aviation Administration
What angle is used on an isometric drawing?
45 Degree
Where on a drawing is the genral tolerance printed?
Block 1 Title of the sheet.
What does DDA stand for?
What is it used for?
Drawing Departure Authorisation.
It’s an exception to the drawing, used to allow the engineer to vary from the requirements of the drawing.
What is ADCN used for?
The Advances Drawing Changes Notice is used to let you know that there will be a change in a drawing in the future.
It is a tempory fixture until the drawing is updated.
Another name for a detail drawing?
Fab drawings.
What does DCN stand for?
What is it a record of?
DCN- Drawing Change Notice.
A record of all changes that have been made to the drawing.
