Mod 10-11-12-13 Flashcards
Why is conformity inspection done
Too see whether the aircraft conforms or matches it specifications
what is MEL used for
allow AC fly with in operated equipement
what should be done after all MTC is done ?
AC cleaned and Wash
when annual inspection completed
one a year
before an aircraft can legally fly what must be done ?
entry on the log book and MTC release
technical record keeping is not part of the 5 basic inspection phases
true
what determines how well an inspector evaluate the aircraft worthiness
judgment and skill of inspector
according with the textbook what does the word Inspect mean
examine by sight and touch
over inflating a tire will affect the tire in what way
center of the tire wear more
why are fusible plugs installed on main wheels of jet aircraft
release air from tire in case of overheat condition
tire pressure should be check as soon the aircraft lands
no
tire ply separation is cause by plugged side wall vents
yes
what should be done for a bearing after grease them
wrapped in paper wax
why is a wheel half heated to install a bearing cup
to enlarge the wheel bearing cavity
what is spalling in regards to inspecting a bearing
chipping of the roller surface
all brands of grease are the same color
no
one of the precautions for removing wheels from the aircraft is to deflate the tire completely prioir removal why?
if the tide bolts are broken, the axle nut is the only thing holding the tire together. If the tire is pressurize removal of the axle nut can damage the AC or injury to bystaders
clean tools and coveralls are essential for service oxygen
yes
what should be done before connect the oxygen cart to the aircraft
purge the lines before attaching the filler valve
when performance servicing, maintenance or inspection of the oxygen system what must be checked
AMM
what do you do with an aircraft oxygen system that is indicating it is completely empty
remove cylinder and sent out for re certified
what pressure do you fill the system id the ambient pressure is high?
higher than stabilized pressure desire
what lubricant can be used to lubricate the treats of the oxygen fittings ?
MIL-G-27617
what should you do when servicing an aircraft system
open the valve on the cylinder slightly and fill system slowly
can you service on an oxygen system that is down to 60 psi
false
which cylinder on the oxygen cart you use first
botle with the lowest pressure, that is higher than the aircraft bottle pressure
retreads tires can be smaller than a new tire
false
the manufacturer instructions should be follow for the lubricant process
yes
what type of cleaning fluid should be use for cleaning landing gear ?
a neutral an easy to remove solution
emergency landing gear systems are use for what ?
lower landing gear in case of a main system failure
what should be done after washing landing gear
lubricate the gear
what does the anti retraction system protect against
landing gear retraction with a fully flat strut
if a main support bushing will not take grease what should you do ?
jack the aircraft
what must be done during and after lubrication in the winter
cleaning the lubrication area
