Misc. Systems

Question 1

The static wicks are important because they:

Answer 1

Dissipate static electricity

Question 2

During preflight, the pilot can determine if the oxygen bottle is turned on by:

Answer 2

Selecting 100% on the mask regulator and taking several deep breathes through the mask

Question 3

With the PASS OXY valve in the NORM position, selecting MAN on the PASS MASK valve:

Answer 3

Admits oxygen to the passenger distribution lines and causes the passenger oxygen masks to drop

Question 4

With the PASS OXY valve in the NORM position and the PASS MASK valve in the AUTO position:

Answer 4

Passenger masks with automatically deploy and the cabin overhead lights will illuminate if cabin altitude reaches 14,000 ft

Question 5

The OXY PRESS gauge reads:

Answer 5

Direct pressure of the cylinder

Question 6

The maximum demonstrated crosswind component for drag chute deployment is:

Answer 6

20 kt

Question 7

The drag chute is deployed by:

Answer 7

Squeezing the control handle and pulling it up to it’s full extension

Question 8

The maximum indicates airpseed for drag chute deployment is:

Answer 8

150 kt

Question 9

If either main landing gear squat switch remains in ground mode after takeoff:

Answer 9

• The landing gear will not retract
• The aircraft will not pressurize
• The amber TO TRIM light may illuminate