Milling Flashcards
What is the maximum depth of cut for an end mill?
Equal to one half the cutter diameter
A face mill will produce a surface that is?
Flat and perpendicular to the axis of the spindle
What holds a milling machine arbor securely in the spindle?
Draw bolt
When the swivel table on a universal milling machine is being re-aligned, how should a magnetic base dial indicator be mounted?
Dial base on the table and pointer on the column. Move the table
When a vies is being aligned on the table of a knee and column milling machine, how should a magnet Base dial indicator be mounted?
Dial base on column, pointer on the vice’s solid jaw. Move the table.
During what milling operation would you use a backlash eliminator?
For climb milling
How is the feed on a milling machine specified?
In inches per minute
What transfers the power from the milling machine spindle to the milling cutter?
The drive keys or lugs
What types of milling machine arbors are there?
A, B, and C arbors
What makes a universal horizontal milling machine different from a plain horizontal milling machine?
The universal milling machines table can swivel
What is the taper per foot used on milling machine spindles?
3 1/2 inches per foot