MAP 1 Flashcards
1413
(Refer to figure 171.) Under which condition should the missed approach procedure for the RNAV (GPS) RWY 33 approach be initiated?
Immediately upon passage of the MAP waypoint with the runway environment not in sight.
Pippen not in sight
1568
(Refer to figure 210.) When on the RWY 6 approach procedure, when approaching the threshold or on the missed approach, you should expect to see
White light flashing all dots.
White flashing all dots
1775
If the pilot loses visual reference while circling to and from an instrument approach and ATC radar service is not available, the missed approach action should be to
make a climbing turn toward the landing runway and continue the turn until established on the missed approach course.
1780
While briefing the assigned approach, you review the missed approach procedure. If you execute the missed approach before reaching DA or MDA, you must
fly to the MAP at or above DA/MDA before making any turns.
1800
If all ILS components are operating and the required visual references are not established, the missed approach should be initiated upon
arrival at the DH on the glide slope.
1953
(Refer to figure 192.) Under which condition should a missed approach procedure be initiated if a runway environment (Paso Robles Municipal Airport) is not in sight?
Once you are over the VOR.
Paso over VOR
1963
(Refer to figure 210.) When should you execute the published missed approach for an S-ILS RWY 6 approach at BDL?
When reaching 373 feet MSL indicated altitude.
BDL 373
2341
(Refer to figure 249.) How do you recognize the missed approach point on the LNAV approach?
At the RW30 waypoint.
3343
When executing a missed approach, a pilot is expected to follow the missed approach instructions while continuing along the published final approach course to the runway threshold or MAP before executing
Any turns.
