Manuevers

Question 1

Steep turns

Answer 1

1. 2 x 90 turns
2. 95K (2000rpm) maintain altitude
3. Cruise checklist
4. 360 w/45 bank
5. Rollout and level
6. Repeat 360 other way
7. Cruise checklist

Question 2

Slow maneuver

Answer 2

1. 2 x 90 turns
2. 1500rpm
3. Landing config (flaps)
4. Maintain altitude—slow almost to stall (45-50)
5. Add power to maintain speed
6. Level-flight/climbs/turns/descents (max 30 bank)
7. Max power/maintain altitude/ begin to reduce flaps
8. Above Vx, flaps=0
9. Cruise checklist

Question 3

Power-off stall

Answer 3

1. 2 x 90 turns
2. 1500rpm
3. Landing config
4. Descend @65K
5. Throttle idle (slow), wings level
6. Raise pitch to stall
7. acknowledge stall
8. Reduce AOA, level wings, max power
9. Retract flaps to 20, then 10 @60K
10. Inc pitch to Vx/Vy
11. Flaps=0 @Vx
12. Cruise checklist

Question 4

Power-on stall

Answer 4

1. 2 x 90 turns
2. 1500rpm
3. Clean config
4. @60K inc pitch and apply full power
5. Inc pitch to stall
6. Acknowledge stall
7. Reduce AOA, level wings, max power
8. Cruise checklist

Question 5

Emergency descent

Answer 5

1. 2 x 90 turns
2. Clean config
3. Reduce to idle
4. Turning descent (30-40 bank)
5. Maintain 120K
6. Notify ATC

Question 6

Rectangular course

Answer 6

1. 2 x 90 turns
2. Select reference area, 90K, maintain altitude
3. Clean config
4. Enter rect. @45 angle downwind leg
5. Be within 1/2-3/4 of reference area
6. Maintain altitude & airspeed
7. Cruise checklist

Question 7

S-Turns

Answer 7

1. 2 x 90 turns
2. Select reference area, 90K, maintain altitude
3. Clean config
4. Enter downwind
5. Adjust bank angle through turn to ensure constant radius
   Maintain altitude & airspeed
   Wings level to reference line

Question 8

Turns around A point

Answer 8

(Circle)

1. 2 x 90 turns
2. Select reference area, 90K, maintain altitude
3. Clean config
4. Enter downwind
5. Maintain altitude & airspeed
6. Straight &level after completing 360