Maintenance publications

Question 1

What is the purpose of airworthiness directives

Answer 1

Used to notify owners and mechanics of conditions that prevent a product or part from being airworthy condition

Question 2

What FAA publication is used to notify Aircraft owners have unsafe conditions

Answer 2

Airworthiness directives

Question 3

When must in airworthiness directive be complied with

Answer 3

All a D’s must be complied with in accordance with the compliance requirements set forth in the A.D.

Question 4

When is the summary of A.D.’s published

Answer 4

Every other year

Question 5

are A D automatically used to certified mechanics

Answer 5

No they are issued two owners

Question 6

Where can you find a list of approved engines for use in a specific model Aircraft

Answer 6

The type of certificate Data sheet

Question 7

Where can the dimensional tolerance be located for a wrist pin installed in an aircraft engine

Answer 7

In the overhaul manual for the engine

Question 8

Where can the empty weight of an airplane be located

Answer 8

In the aircraft weight and balance logs

Question 9

Where can you find airworthiness standards for normal category airplanes

Answer 9

Title 14 CFR 23

Question 10

Where can you find airworthiness standards for transport category airplanes

Answer 10

Title 14 CFR 25

Question 11

What federal regulation defines the requirements for the use of type certificates

Answer 11

Title 14 CFR 21

Question 12

Where would you look to find out if A specific airplane can be certified in more than one category

Answer 12

You type certificate data sheet

Question 13

What publication is used by airframe, engine, and component manufactures to notify Aircraft owners of design defects

Answer 13

Service bulletins

Question 14

What publication contains complete instructions for maintenance of all systems and components installed in an aircraft

Answer 14

The manufacturers aircraft maintenance manual

Question 15

What manual is prepared by the manufacture for technicians who normally perform work on a product, parts and systems while installed in an aircraft

Answer 15

The aircraft maintenance manual

Question 16

Who is responsible for ensuring that only the most current information is used when performing any maintenance on an aircraft

Answer 16

The person authorized to approve the maintenance

Question 17

What are FAA advisory circulars

Answer 17

They are non-regulatory FAA publications that expand upon and explain existing rules and regulations

Question 18

On older aircraft for which manuals are not available, what publication could be used to inspect and maintain the aircraft

Answer 18

The AC 43.13

Question 19

When our service bulletins considered mandatory

Answer 19

When they are referenced within the airworthiness directives

Question 20

Our statements included in the Federal aviation regulations mandatoryOr optional to be complied with

Answer 20

Mandatory

Question 21

When would you complete the FAA form 337 in triplicate

Answer 21

When installing extended range fuel tanks in a baggage or passenger compartment. When is given to the owner, what is sent to the FAA within 48 hours after the aircraft is approved for return to service, and one is placed on board the aircraft

Question 22

What is the purpose of a minimum equipment list

Answer 22

The MEL permits aircraft to be flown with inoperable nonessential equipment long enough for repairs to be made

Question 23

What weight is an aircraft classified as large

Answer 23

12,500 pounds and above