LIMITATIONS

Question 1

Icing conditions exist in flight when visible moisture in any form is present (i.e. clouds, fog with visibility
of 1 mile or less, rain, snow, sleet, or ice crystals) and

Answer 1

Total air temperature of 10°C or below

Question 2

On takeoff or missed approach, do not engage the autopilot below

Answer 2

400 feet AGL

Question 3

The minimum altitude for use of the autopilot on a non-precision approach is

Answer 3

50 feet below MDA/DA

Question 4

The minimum altitude for use of the autopilot on an ILS approach is

Answer 4

50 feet AGL

Question 5

Max flap extension altitude is

Answer 5

20,000 feet

Question 6

Identify the recommended severe turbulence penetration speed, CRUISE

Answer 6

TURB N1 setting from cruise page

Question 7

Identify the recommended severe turbulence penetration speed, CLIMB and DESCENT

Answer 7

280 knots / .76 Mach

Question 8

What is the RECOMMENDED CROSSWIND COMPONENT for the following conditions/parameters: Runway
Condition Code: 5 Surface Condtion:1/8 inch WATER TAKEOFF Crosswind Component (Blended winglets/Spilt
Scimitar Winglet)

Answer 8

25/25

Question 9

What is the RECOMMENDED CROSSWIND COMPONENT for the following conditions/parameters: Runway
Condition Code: 6 Surface Condition: DRY TAKEOFF Crosswind Component (Blended winglets/Split Scimitar
Winglet)

Answer 9

34/33

Question 10

What is the RECOMMENDED CROSSWIND COMPONENT for the following conditions/parameters: Runway
Condition Code: 6 Surface Condition: DRY LANDING Crosswind Component (Blended Winglet/Spit Scimitar
Winglet

Answer 10

40/37

Question 11

Do not use LVL CHG on final approach below _______.

Answer 11

1000 feet AFE