Learjet ROPAT (1/25/2024)

Question 1

Three things before every maneuver

Answer 1

• Clearing turns
• Observe a minimum safe altitude
• Receive ATC Clearance if required

Question 2

PF

Answer 2

Pilot Flying

Question 3

PM

Answer 3

Pilot Monitoring

Question 4

Course (Deviation that should be announced)

Answer 4

One dot or greater left or right deviation, +/- 10 degrees of heading

Question 5

Altitudes (Deviation that should be announced)

Answer 5

Climbing or descending from assigned altitude +/- 100 feet

Question 6

Airspeed (Deviation that should be announced)

Answer 6

Exceeding desired or assigned speed +/- 10 knots

Question 7

Descent rates (Deviation that should be announced)

Answer 7

Descending greater than 1000 fpm during the final approach phase

Question 8

Leaving DH/DA (Deviation that should be announced)

Answer 8

One-quarter scale deflection of glideslope/localizer

Question 9

MDA (Deviation that should be announced)

Answer 9

Descending below the selected altitude

Question 10

After the navaid is tuned and identified, PM announces:

Answer 10

“Facility Tuned and Identified”

Question 11

Steps for a malfunction in flight (4 items)

Answer 11

• Observing crewmember verbally announces any indication of a malfunction
• Malfunction verified
• PF announces decision, accomplishes memory items, calls for proper checklist
• PF monitors PM while accomplishing memory items and checklists

Question 12

V1 (White)

Answer 12

Takeoff decision speed

Question 13

Vr (Blue)

Answer 13

Rotation speed

Question 14

V2 (Green)

Answer 14

Takeoff safety speed/second segment climb speed

Question 15

Vfs

Answer 15

Flap retraction speed

Question 16

Vref

Answer 16

Landing reference speed for flaps 40 (Blue)

Question 17

Vlndx

Answer 17

Landing reference speed for flaps < 40 (Blue)

Question 18

Vapp

Answer 18

Approach climb speed (green)

Question 19

AFM landing distances are predicated on… (3 things)

Answer 19

• Crossing the threshold at 50 ft
• At Vref with throttles at idle
• On glidepath

Question 20

The maximum demonstrated crosswind is….

Answer 20

22 knots

Question 21

FGC

Answer 21

Flight Guidance Controller

Question 22

Altitude change when aircraft is being handflown (Callouts, 4 things)

Answer 22

• PF flies the aircraft
• PM makes the required selection in the guidance panel
• PM says “XX,XXX Set”
• PF verbally acknowledges new altitude

Question 23

Altitude change when autopilot is engaged (Callouts, 4 things)

Answer 23

• PF makes all guidance selections
• PM makes all altitude selections
• PF says ex. “FL350 Set”
• On approach PF directs the PM to set intermediate altitudes as required “Set 1900 Feet”

Question 24

Flight Director Calls (Callout)

Answer 24

For example:

• “Select FLC”
• “FLC Active”