Lathe Flashcards
What is the operation done on a Lathe
Turning
A ______ holds the workpiece in place for turing
Chuck
A _____ lathe is another name for a manually operated lathe
Engine
_____ is the base of a lathe
Bed
The ____ slides back and forth on the bed and has a compound rest
Carraige
____ holds the tools on a lathe
Tool post
A ____ _____ sits atop the Carriage
Compound rest
A ______ is attached to the headstock and uses a ________ to hold the workpiece
Spindle, Chuck
________ is at the spindle end and _____ is at the other end of the bed
Headstock, Tailstock
The Tailstock has a handwheel on the back and a _____ on the opposite side
Quill
_____ is between the carriage and compound rest
cross slide
The compound rest is also called the
Top slide
The parallel percision ground rails are called the _____
Ways
Cross slide is responsible for _____ motion perpendicular to the carriage direction.
Transverse
2 uses for tailstock
Supplying end support, or drilling concentric holes
