Chucks 2

Question 1

Several different types of chuck use a ___ ____ to move, tighten or loosen the jaws.

Answer 1

Chuck Key

Question 2

The problem with 3 and 4 jaw chucks is the _______ prevents them from ______ ______ with positional repeatability.

Answer 2

Complexity, Perfectly True

Question 3

_____ and _____ can be caused by 3 and 4 jaw chucks not having enough grip from insufficient clamping surface area.

Answer 3

Slippage and Marring

Question 4

Slippage and marring are addressed by using the ____ _____

Answer 4

Collet Chuck

Question 5

The 2 Collet Chuck parts are

Answer 5

Body and Collet

Question 6

The collet chuck always runs _____ and with ______.

Answer 6

Concentrically, Repeatability

Question 7

The size limitation for collet chucks is

Answer 7

1 inch

Question 8

gripping or releasing a collet the collet must be move ____ or____ with respect to the body

Answer 8

backwards or forwards

Question 9

2 types of collet lockers are

Answer 9

Draw Bar(most common), Chuck Key

Question 10

Draw Bars are actuated through a hollow spindle via what 3 methods

Answer 10

Electric Solenoid, Pneumatic/Hydraulic Ram, Mechanical Lever

Question 11

CNC Lathes use what type of chuck

Answer 11

Indexing

Question 12

Indexing chucks are fundamentally a ____ jaw chuck

Answer 12

2

Question 13

what 2 jaws are on a Indexing chuck

Answer 13

Indexing Jaw, Griping Jaw

Question 14

The _____ face for each jaw is customizable and swappable in an indexing chuck.

Answer 14

Grip