Chucks

Question 1

The output end of a lathe spindle terminates with the ____ _____

Answer 1

Spindle Nose

Question 2

The two types of standard fittings for attaching various work holding devices.

Answer 2

L-type Long Taper Key Drive Spindle Nose, Threaded Spindle Nose

Question 3

Standard practice is to fit a ______ to the spindle nose.

Answer 3

Backplate

Question 4

_____ _____ is fitted to the rear of each work holding device using ____ studs.

Answer 4

Adapter Plate, Camlock

Question 5

A work holding device that is fitted with an adapter plate is a _____.

Answer 5

Chuck

Question 6

The Backplate is held on with ____ and a ___ is used for attaching and releasing.

Answer 6

Cams, Key

Question 7

Most common chuck

Answer 7

3-Jaw Self-Centering

Question 8

A chuck key is used to actuated the ______ Gear via a _______/______ gear set with a square drive socket.

Answer 8

Scroll, Pinion/Crown

Question 9

The 3-jaw Self-Centering chuck is secure or __-____.

Answer 9

Self-Locking

Question 10

For square or octagonal stock a __________ chuck is used

Answer 10

4-Jaw Self-Centering

Question 11

The more common 4-Jaw Chuck is the ______

Answer 11

4-Jaw Independent chuck

Question 12

To center a 4-Jaw Independent Chuck ______ is used.

Answer 12

Dial Test Indicator

Question 13

4-jaw independent allows for ______ turning which the rotation is not coincident with the geometric center of the workpiece cross-section.

Answer 13

Eccentric